Chapter 6. Managing Nodes; Adding And Removing Nodes From Protectier Manager; Adding Nodes - IBM TS7650G User Manual

Deduplication gateway for protectier
Hide thumbs Also See for TS7650G:
Table of Contents

Advertisement

Chapter 6. Managing nodes

Topics in this chapter describe how to manage nodes on the ProtecTIER system.
The ProtecTIER system supports one-node systems.

Adding and removing nodes from ProtecTIER Manager

The topics in this section describe how to add a node, a subnetwork node, and
remove a node from the ProtecTIER system using the ProtecTIER Manager.
Note: This section provides instructions for adding and removing nodes when
using the TS7650G.
Adding a node registers the node IP address and port number with the instance of
ProtecTIER Manager at your workstation. Similarly, removing a node removes the
node registration from ProtecTIER Manager at that workstation.

Adding nodes

Complete this task to add a node to your ProtecTIER system with ProtecTIER
Manager.
About this task
Adding a node registers the node IP address and port number with the instance of
ProtecTIER Manager at your workstation.
To add a node to your ProtecTIER system:
Procedure
1. Run the ProtecTIER Manager application:
2. From the Systems Management view, click the Add new node button on the
3. Enter the IP address of the node and click Ok. The node is displayed in the
© Copyright IBM Corp. 2012, 2016
v For a Windows-based ProtecTIER Manager workstation, run the ProtecTIER
Manager application:
Click Start > All Programs > IBM > ProtecTIER Manager > IBM
ProtecTIER Manager.
v For a Linux-based ProtecTIER Manager workstation, click the icon for
ProtecTIER Manager on the Desktop or the location of the shortcut specified
during the installation.
The ProtecTIER Manager window is displayed.
toolbar located at the top of the ProtecTIER Manager window. The Add new
node dialog box is displayed, prompting you for the IP address and Port
number of the node that you want to add.
Navigation pane and the Login button is displayed in the View pane.
Note: Do not change the port number of the node unless directed to do so by
trained ProtecTIER specialist.
37

Advertisement

Table of Contents
loading

Table of Contents