7. Restart the node.
8. Send the fsck output to trained ProtecTIER specialist to determine the next
Running fsck
Complete this task to run fsck to check the consistency of the file systems before
you run ProtecTIER Manager to check and repair any ProtecTIER system errors.
Before you begin
Before you run fsck, run the procedure in "Checking and repairing errors" on
page 173 to check for errors that require the use of fsck. Also, ensure that the file
system on which you intend to run fsck is unmounted.
Procedure
176
IBM TS7650G Deduplication Gateway for ProtecTIER
# reboot –nf
ProtecTIER is now up and running.
step.
1. On a two-node cluster, select one of the ProtecTIER nodes. If you have a
single node system begin with step 7 on page 177.
2. At the login: prompt, log in with the ID root and the password admin.
3. Type menu on the command line and press Enter. The ProtecTIER Service main
menu appears.
----------------------------------------------------------------------
ProtecTIER Service Menu running on rasddx
----------------------------------------------------------------------
1) ProtecTIER Configuration (...)
2) Manage ProtecTIER services (...)
3) Health Monitoring (...)
4) Problem Alerting (...)
5) Version Information (...)
6) Generate a service report
7) Generate a system view
8) Update ProtecTIER code
9) ProtecTIER analysis (...)
E) Exit
----------------------------------------------------------------------
>>> Your choice?
4. Select Manage ProtecTIER services (...). The Manage ProtecTIER services (...)
menu is displayed.
----------------------------------------------------------------------
ProtecTIER Service Menu running on rasddx
Manage ProtecTIER Services (...)
----------------------------------------------------------------------
1) Display services status
2) Start all services
3) Stop all services
4) Stop ProtecTIER services only (including GFS)
5) Stop VTFD service only
6) Poweroff This Node
7) Reboot This Node
B) Back
E) Exit
----------------------------------------------------------------------
>>> Your choice?
5. Select Stop all services to stop the ProtecTIER services on the node.
6. Shut down the stopped node.
®
: User's Guide for FSI Systems