Recovering The Configuration Of A Replaced Server - IBM TS7650G User Manual

Results
The re-installation process for Red Hat Linux version 5.11 and ProtecTIER version
3.4.1 is complete. Proceed to "Recovering the configuration of a replaced server."

Recovering the configuration of a replaced server

Complete this task to recover the configuration of a replaced server as part of the
recovery process.
Procedure
188
IBM TS7650G Deduplication Gateway for ProtecTIER
e. Select Display version information. The ProtecTIER version is shown in
the first line of output, in the first three digits after the colon. The version
information looks similar to the following message:
PT version : 3.4.1
If the ProtecTIER version is correct, continue to the next step. If the
ProtecTIER version is incorrect, the installation has failed. Contact IBM
Support for assistance.
1. After the system boots up from installing the ProtecTIER package, type
ptconfig at the login as: prompt and ptconfig at the password: prompt. The
ProtecTIER Service Menu is displayed:
----------------------------------------------------------------------
ProtecTIER Service Menu running on rasddx
----------------------------------------------------------------------
1) ProtecTIER Configuration (...)
2) Manage ProtecTIER services (...)
3) Health Monitoring (...)
4) Problem Alerting (...)
5) Version Information (...)
6) Generate a service report
7) Generate a system view
8) Update ProtecTIER code
9) ProtecTIER analysis (...)
E) Exit
----------------------------------------------------------------------
>>> Your choice?
2. From the ProtecTIER Service Menu, select ProtecTIER Configuration (...).
Type the corresponding number and press <Enter>. The ProtecTIER
Configuration (...) menu is displayed:
®
: User's Guide for FSI Systems