Defining A Workgroup; Authentication Setup Wizard - IBM TS7650G User Manual

Figure 11. Authentication setup wizard
2. Select the authentication type and click Next to advance the wizard according

Defining a Workgroup

About this task
Continue using the Authentication setup wizard to set the parameters for
Workgroup authentication.
Procedure
1. From the Welcome page of the Authentication setup wizard, select the
2. Use the Properties window to assign a descriptive name for the workgroup.
3. Click Finish to save and exit the Authentication setup wizard.
4. After a workgroup is successfully configured, a popup window prompts the
What to do next
Go on to "User's management for CIFS workgroups" on page 80.
78
IBM TS7650G Deduplication Gateway for ProtecTIER
to the chosen authentication:
v Workgroup
Go to "Defining a Workgroup."
v Active directory
Go to "Defining the Active directory" on page 79.
Workgroup authentication type and click Next. The Properties window is
displayed.
Type a name in the Workgroup name: field and click Next. The Preview
window displays the Authentication type and Workgroup name.
user to assign users via the Users Management wizard. Click Yes and go on to
"User's management for CIFS workgroups" on page 80.
®
: User's Guide for FSI Systems