Listexportpaths Command - IBM TS7650G User Manual

Table 24. ModifyExportPath command (continued)
Command
Example:
ModifyExportPath
►► ./ptcli ModifyExportPath --ip 9.148.220.45 --loginFile h:\ptcli\ptadmin
► Command Specific Options
Command Specific Options:
--fsName <NAME> --exportName <NAME>
Command Specific Options:
[--enablement STATUS] <Enabled or Disabled>
►
[--uid ID] <ID>
Table 25. ListExportPaths command
Command
ListExportPaths
Explanation
--[newExportName <NAME>]
[--enablement STATUS]
--secured STATUS
[--uid ID]
[--gid ID]
--allowedhosts
<(FIELD=VALUE...),...(...)>
[--newExportName] <NAME>
--allowedHosts <LIST>
[--gid ID] <ID>
Explanation
Print the list of export
paths on a given system.
Command Specific Options
--secured STATUS <Yes or No>
Command Specific Options
Name
--fsName <NAME>
Chapter 8. Managing and monitoring ProtecTIER through the CLI
A new name for the export path
Export the enablement status.
Valid values are enabled and
disabled.
Port security status allows only
connections from port 1024 and
below. Valid values are Yes and
No.
The user ID to use for anonymous
users (when squash is enabled).
The group ID to use for
anonymous users (when squash is
enabled).
Comma-delimited list of IP
addresses of the allowed hosts
(without spaces). Each host is in
the form of a tuple, with the
following required fields: IP,
permission = r / rw, mapping =
root_squash / no_root_squash.
Note: Linux users must add the
backslash character (\) before
special characters such as (,) and *.
Command Specific Options
Explanation
File system name (taken
from "ListFileSystems"
output).
►
►◄
►
65