Figure 35. SNMP trap report
Using the ProtecTIER Manager Configuration menu
About this task
This task describes how to use the ProtecTIER Manager Configuration menu to
enable and define the parameters for SNMP reporting.
Typically, hardware faults are reported in ProtecTIER Manager. However, certain
conditions will prevent the GUI from communicating with the server, and prevent
the reporting of fault information for the failed component. By enabling SNMP
reporting, you will have greater assurance that hardware faults do not go
undetected.
148
IBM TS7650G Deduplication Gateway for ProtecTIER
®
: User's Guide for FSI Systems