Removeexportpath Command; Createfsipolicy Command - IBM TS7650G User Manual

Table 25. ListExportPaths command (continued)
Command
Example:
ListExportPaths
►► ./ptcli ListExportPaths --ip 9.148.220.45
Command Specific Options:
--fsName <NAME>
Table 26. RemoveExportPath command
Command
RemoveExportPath
Example:
RemoveExportPath
►► ./ptcli RemoveExportPath --ip 9.148.220.45 --loginFile h:\ptcli\ptadmin
Command Specific Options:
--fsName <NAME> --exportName <NAME>
ptcli Replication commands
This topic describes how to use the ProtecTIER server through the command line
interface (CLI) using FSI replication commands.
Table 27. CreateFsiPolicy command
Command
CreateFsiPolicy
66
IBM TS7650G Deduplication Gateway for ProtecTIER
Explanation
Explanation
Deletes NFS support.
Explanation
Create FSI replication
policy
®
: User's Guide for FSI Systems
Command Specific Options
Command Specific Options
Command Specific Options
Name
--fsName <NAME>
--exportName <NAME>
Command Specific Options
Command Specific Options
Name
--name <NAME>
--sourcePaths
<PATH,...,PATH>
--destinationPaths
<PATH,...,PATH>
Explanation
File system name (taken
from "ListFileSystems"
output).
Export path name (taken
from "ListSharedPaths"
output).
Explanation
Policy name
A comma-delimited list of
source paths, with each
path in the following
format: fsName:sourcePath
A comma-delimited list of
destination paths, with each
path in the following
format:
repositoryId:fsName:
destinationPath
►◄
►◄