Figure 40. Set threshold for file system usage
27. Select the checkbox to enable the threshold value input fields and select the
28. Enter the corresponding values for the upper and lower file system usage
29. When you have finished setting the file system usage threshold limits, click
30. From the navigation pane, select the E-mail Alerts option. The E-mail Alerts
31. The system configuration to enable and define the parameters for SNMP
Generating a ProtecTIER service report
Complete this task to generate a service report on your ProtecTIER system for use
by IBM Service.
154
IBM TS7650G Deduplication Gateway for ProtecTIER
threshold unit type (GB or Percent).
threshold limits in the input fields.
Ok to close the window and click Submit.
window opens displaying the e-mail to which the alerts will be sent.
Note: The e-mail displayed is the e-mail address that was configured during
RAS configuration.
reporting is now complete.
®
: User's Guide for FSI Systems