Modifysharedpath Command - IBM TS7650G User Manual

Table 20. ModifySharedPath command
Command
ModifySharedPath
Example:
ModifySharedPath
►► ./ptcli ModifySharedPath --ip 9.148.220.45 --loginFile h:\ptcli\ptadmin --fsName <NAME>
Command Specific Options:
--shareName <NAME>
► Command Specific Options
Command Specific Options:
[--allowedHosts] <IP,...,IP>
►
[--userReadWrite] <NAME,...,NAME>
62
IBM TS7650G Deduplication Gateway for ProtecTIER
Explanation
Modify share
[--newShareName] <NAME>
[--userReadOnly] <NAME,...,NAME>
®
: User's Guide for FSI Systems
Command Specific Options
Name
--fsName <NAME>
--shareName <NAME>
[--newShareName <NAME>]
[--enablement <STATUS>]
[--allowedHosts
<IP,...,IP>]
[--userReadOnly
<NAME,...,NAME>]
[--userReadWrite
<NAME,...,NAME>]
Command Specific Options
[--enablement] <STATUS>
Explanation
File system name (taken
from "ListFileSystems"
output).
Shared path name (taken
from "ListSharedPaths"
output).
A new name for the shared
path.
Share enablement status.
Valid values are enabled,
enabled.
Comma-delimited list of IP
addresses of the allowed
hosts, or 'all' if all hosts are
allowed.
Comma-delimited list of
user names to be set "Read
Only" permission (taken
from "ListSambaUsers"
output).
Comma-delimited list of
user names to be set
"Read"mand "Write"
permissions (taken from
"ListSambaUsers" output).
►◄
►
►