Monitoring A File System; Monitoring File System Properties; Monitoring A Cifs Share Configuration; File System Properties - IBM TS7650G User Manual

Enabled
Click a policy to see the policy's details, such as: source directories and destination
repository paths.

Monitoring a file system

This section describes how to use ProtecTIER Manager to monitor a file system in
FSI.
From the Systems Management view, select a file system under the File System
category in the navigation pane. The file system monitoring window displays the
File system properties, and tabs that show the CIFS share configuration, the NFS
export configuration, and the Folders navigation.

Monitoring file system properties

The File system properties pane displays the following file system configuration
properties:
To change the file system configuration properties, click Modify properties and
follow the steps in "Modifying properties of a file system" on page 75.

Monitoring a CIFS share configuration

This section describes how to use ProtecTIER Manager to monitor a CIFS share
configuration.
Click on the CIFS tab to display the CIFS Shares details:
Policy can be enabled or disabled for running, or partially enabled with
some of the destinations disabled. A policy can also be enabled or disabled
per destination.
Table 38. File system properties
Properties
Configured max. size
Hyperfactor
Compression
Current max. size
Usage
Table 39. CIFS Share configuration
Column
Enabled
Name
Path
Description
The maximum file system size defined
during file system creation.
The data factoring mode status.
Data compression is either enabled (on) or
disabled (off).
The current maximum file system size.
The actual amount of space (in MiB, GiB, or
TiB) used from the file system percentage.
Description
Displays if CIFS share is either activated or
deactivated.
Displays the CIFS share name.
Displays the directory path of the CIFS
share.
Chapter 14. Monitoring ProtecTIER FSI
137