IBM TS7650G User Manual page 52

6. Select Upgrade Firmware Version for BMC and GEM Components. Type the
7. Once the system is online, run the Update Firmware option again to make sure
32
IBM TS7650G Deduplication Gateway for ProtecTIER
------------------------------------------------------------------------------
ProtecTIER Service Menu running on rassmx
ProtecTIER Configuration (...)
Update Firmware (...)
------------------------------------------------------------------------------
1) Update Server Firmware
2) Display Firmware Version for BMC and GEM Components
3) Upgrade Firmware Version for BMC and GEM Components
B) Back
E) Exit
------------------------------------------------------------------------------
>>> Your choice?
corresponding number and press <enter>. The current firmware is checked and
if an upgrade is needed, a confirmation message is displayed informing that
services will be stopped and 1 or 2 reboots are needed during the upgrade
process. Select Yes and press <enter>. Wait for the process to complete:
Your Choice? 3
BeginProcessingProcedure [Jan 30 07:47:33]
Checkcurrent Firmware Versions [ Done ]
In ordertoupdatetheNode's firmware level, alltheserviceswill be stopped.
The firmware upgradeprocesswill requiere 1 reboot
Do youwanttocontinue? (yes|no) yes
Stoppingptrasd [ Done ]
Stoppingvtfd [ Done ]
Stoppingptcluster [ Done ]
Updating BMC firmware
Updating CPLD firmware
Updating BIOS firmware
Machine will be rebooted
the process completed. If firmware was upgraded successfully the following
message is displayed:
Your choice? 3
Begin Processing Procedure [Jan 31 11:25:43]
Check current Firmware Versions
All firmware versions are up to date.
End Processing Procedure Successfully [Jan 31 11:25:43]
®
: User's Guide for FSI Systems
[ Done ]
[ Done ]
[ Done ]
[ Done ]