Protectier Repository Commands; Createrepository Command; Raidconfigurations Command - IBM TS7650G User Manual

ProtecTIER repository commands

The following tables contain lists of commands to invoke on the ProtecTIER
repository.
Table 5. CreateRepository Command
Command
CreateRepository
Example:
CreateRepository
►► ./ptcli CreateRepository --ip 9.148.220.101 --loginFile h:\ptcli\ptadmin
Command Specific Options:
--name PTCLI_REP --system PTCLI_SYS --size 2 --peak 300 --ratio 13 --raid FC-10K,4+4,120
Command specific options:
--metadata <MOUNT_POINTS>
Table 6. RaidConfigurations Command
Command
RaidConfigurations
Explanation
Create a repository
--userdata <MOUNT_POINTS>
Chapter 8. Managing and monitoring ProtecTIER through the CLI
Command Specific Options
Name
--name <NAME>
--system <NAME>
--size <SIZE>
--peak <NUM>
--ratio <NUM>
--raid <X,Y,Z>
[--metadata
<MOUNT_POINTS>]
[--userdata
<MOUNT_POINTS>]
Command Specific Options
Command specific options
Explanation
Prints information about the supported raid
configurations
Explanation
Repository name
System name
Repository physical
maximum size in TB
Peak throughput in MB
Deduplication ratio
Metadata raid configuration
in the form of [X,Y,Z]
where (X = Type), (Y =
Members) and (Z = Disk
size in GB) taken from
"RaidConfiguations" output
List of GFS (global file
system) mounted file
systems used to store
ProtecTIER repository
metadata
List of GFS mounted file
systems used to store
ProtecTIER repository user
data
►◄
55