How To Display Ais Target Data - Furuno FMD-3100 Operator's Manual

14.8

How to Display AIS Target Data

Standard data
Put the cursor on a desired AIS target then push the left button.
Title bar
MMSI
Vessel name
Bearing
Range
Course over ground
Speed over ground
CPA
TCPA
Bow cross range
Bow cross time
Position
1
* : The range of the TCPA value depends on the input sentence.
(Blank if no sentence is received.)
TTM: -99:59 to 99:59
TTD: -81:59 to 81:59
* 2 : [Altitude] appears when the selected target is an AIS SART airfcaft.
* 3 : Scroll buttons appear only when there is more than one AIS target's data displayed.
(1/2)
*
1
14. AIS TARGET FUNCTIONS
Normal/Expand
button
Scroll buttons*
Close button
Heading
Rate of turn
NAV status: *
Navigation status*
Underway
using
engine
3
2
14-9