Satellite Position (Skyplot) Category - Furuno FI70DSW Operator's Manual

2.10

Satellite Position (Skyplot) Category

Blocked
area
Own ship
Antenna
height
The satellite position category shows the location of available satellites, along with rel-
evant tracking and satellite position information.
Display indication
Position fixing mode and
accuracy level
Dilution of Position
Satellite number and elevation
Signal to Noise Ratio (SNR)
Selected antenna
Altitude
Own ship
Blocked area
Elevation mask
2. DISPLAY CATEGORIES AND CATEGORY SPECIFIC MENUS
Position fixing mode
and accuracy level
S2D
N
15
XX
XX
XX
XX
XX
XX
XX
ALT
21.9 m
Indicates the mode used for position fixing and the ac-
curacy level
Indicates the rate at which positioning and accuracy
degrade.
Indicates the satellite number and elevation. The col-
oration of the icon depends on the SNR (see below).
Indicates the overall quality of the signal (H=High,
M=Medium or L=Low) received from the satellite. Dark
blue indicates a high quality signal, white indicates a
low quality signal.
Indicates the number of the antenna used to display
the satellite positions.
Indicates the height at which your antenna is installed.
Indicated as a red circle at the center of the display.
Indicates areas which have been set as, or detected to
be, blocked. Satellites which appear within a blocked
area may not be reliable.
Indicated as a gray line, the elevation mask increases
in thickness as the mask value is increased.
DOP
Dilution of Position
1.9
Satellite location
XX
and elevation
XX SNR
Signal to
H
Noise Ratio
M
L
ANT1
Selected antenna
Elevation mask
Description
2-11