Ldap Client; Table 3-75 Ldap Client Configuration Settings; Table 3-76 Verifying Ldap Client Configuration Settings - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide

LDAP Client

LDAP Client must be configured for Call Manager service. After LDAP Client is configured,
Device is automatically registered to Call Manager LDAP.
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# ldapclient
3
IP-PBX(config-ldapclient)#name IPNext190_test
4
IP-PBX(config-ldapclient)#host 127.0.0.1 389
5
IP-PBX(config-ldapclient)# ldap enable
6
IP-PBX(config-ldapclient)# autoreg
start
Step
1
IP-PBX# show run
Building configuration...
Current configuration:
version 8.47.024
hostname IP-PBX
!
ldapclient
name IPNext190_test
host 127.0.0.1 389
ldap enable
!
!
2
IP-PBX# show call-manager domain cluster

Table 3-75 LDAP Client Configuration Settings

Command

Table 3-76 Verifying LDAP Client Configuration Settings

Command
AddPac Technology Proprietary & Documentation
Description
Enter APOS command entry mode
Enter ldapclient configuration mode
Create a device name for registering
ldap.
Configure ladap server IP and port
Default IP 127.0.0.1 Default Port 389
Enable ldapclient service
(Default: Disable)
(optional) Use this command
reregistering the device automatically
if the device is deleted
Description
Use show run command to verify the
configuration settings of ldap client.
Use show call-manager domain cluster
to
132 - 92