Table 3-4 Verifying The User Account Information; Table 3-5 Registering A New User - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide
Step Command
1
IP-PBX# show username
username root password router ;
password is clean text type administrator access
username abc password abc ;
password is clean text type administrator access
username abcd password abcd ;
password is clean text type operator access
username abcde password abcde ;
password is clean text type user access
Step Command
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# username ?
WORD User name
IP-PBX(config)# username addpac ?
nopassword
password
3
IP-PBX(config)# username ?
WORD User name
IP-PBX(config)#username addpac password ?
0 Specifies an UNENCRYPTED password
will follow
7 Specifies a HIDDEN password will
follow
WORD The UNENCRYPTED (cleartext) user
password

Table 3-4 Verifying the User Account Information

Table 3-5 Registering a New User

No password is required
for the user to log in
Specify the password
the user
AddPac Technology Proprietary & Documentation
Description
Use APOS command to verify
the user account information
(The information above the
account level is not displayed)
Description
Enter APOS command input mode
Set the login password for authentication
nopassword : non-authentication mode
password: authentication mode
for
Set the password to be displayed
0: Enter the password without encryption
(displaying the password)
7: Enter the password with encryption (not
displaying the password)
WORD: Enter the
encryption (displaying the password)
password without
132 - 46