IPNext 190 System Installation Guide
logging
Use logging command to manage devices and logs the operational status of the devices and determines the level
of this information, provides the information to a specific host. All the settings of logging can be done in Global
Configuration Mode.
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)#
172.17.10.20 515
3
IP-PBX(config)# logging on
4
IP-PBX(config)# logging command
5
IP-PBX(config)# logging event ?
0-emergency
1-alert
2-critical
3-error
4-warning
5-notice
6-informational
7-debug
Table 3-40 Configuring Logging
Command
logging
host
System unusable
Immediate action needed
Critical condition
Error condition
Warning condition
Normal,
but
significant,
condition
Informational
only
debug-level messages
AddPac Technology Proprietary & Documentation
Enter APOS command entry mode
Specify the IP address and port of the
server
ip
remote
information is to be sent
Enable logging
(Default: disable)
Transmit command entry through vty
Set the condition for logging event
Using
recommended in general
messages
Description
host
to
which
logging
logging
event
7-debug
is
132 - 66
Need help?
Do you have a question about the IPNext190 and is the answer not in the manual?