AddPac IPNext190 Installation Manual page 36

IPNext 190 System Installation Guide
[USB] Start ROOT HUB timer
Start Target Debug Server
Attach FastEthernet Interface at Slot 0, Port 0-1, <0-0>/<0-1>
[USB] Start HUB event processing
FastEthernet0/0: link is up 100 Mbps (full duplex)
FastEthernet0/1: link is up 100 Mbps (full duplex)
Interface FastEthernet0/0, changed state to UP
Interface FastEthernet0/1, changed state to UP
Hardware Type ID = 0
Hardware Revision ID = 0x0
Slot (0) Module type : FXO
Start SendMail Server
can't open configuration file [flash:/flash/apos.cfg]
Start File Transfer Protocol Server (listen tcp/21)
HTTP: document_root : /hd/smartclient
Start RtpCallScanTimer for group default
Press RETURN to get started.
RTA Module Ready
CPU internal DSP SRAM .... OK
Audio DSP S/W download ... OK
AudioConference Module Ready
Add default voipPeer(1000) ......
VoipGateway::Init1 - No IP address on the VoIP Interface
CM CREATE DOMAIN
CM CREATE DOMAIN
Welcome, APOS(tm) Kernel Version 8.47.010.
Copyright (c) 1999-2008 AddPac Technology Co., Ltd.
Login:
Login:
AddPac Technology Proprietary & Documentation 132 - 36