IPNext 190 System Installation Guide
Table 3-56 Verifying call-manager sscp store-event Settings
Step
1
IP-PBX# show run
Building configuration...
Current configuration:
version 8.47.024
hostname IP-PBX
!
call-manager sscp store-event-time 1
call-manager sscp store-event-count 1
!
2
IP-PBX# show call-manager sscp
!
(skipped)
!
SSCP Policy Information.
cm service status = On
signaling-port = 8855
packet-size = 1472
client-session logging count = 0
client-session registering count = 0
event store time = 1(sec)
event store count = 1
event total store count = 0
!
Command
AddPac Technology Proprietary & Documentation
Description
Use shown run command to verify the
settings of call-manager sscp store-
event
Verify the settings of call-manager sscp
store-event time/count by using show
call-manager sscp command.
132 - 78
Need help?
Do you have a question about the IPNext190 and is the answer not in the manual?