IPNext 190 System Installation Guide
IP-PBX(config)#
clock
Use 'show clock' command to find out the system time and the present running time. This
command displays the time logging and debugging on the present time basis. The clock should
be set to the present time.
The following is an example for setting up clock to the present.
Step
# config t
1
2
(config)# clock time 2008 08 07 15 50 00
Step
1
IP-PBX# show clock
System was started at Fri Dec 1 01:54:57 2008
Current time is Fri Dec 1 07:35:11 2008
Running time is 0 days 05:40:14
IP-PBX#
Table 3-14 Clock Configuration Settings
Command
Table 3-15 Verifying clock Settings
Command
AddPac Technology Proprietary & Documentation
Description
Enter APOS configuration command mode
Set the clock to the present time of 2005 06 07 15 50 00
Use show clock command to verify the
present time setting
Description
132 - 51
Need help?
Do you have a question about the IPNext190 and is the answer not in the manual?