Configuring System Service; Http Server; Table 4-3 Configuring Http Server - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide

Configuring System Service

http server

This example enables HTTP Server and Http document-root Directory.
(Default: http server, http document-root /hd)
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# http server
3
IP-PBX(config)# no http authentication
4
IP-PBX(config)# http document-root /hd
Table 4-4 Configuring HTTP Server
Command
AddPac Technology Proprietary & Documentation
Description
Enter the APOS command mode
Enable HTTP server (default)
Configure the server to be accessed without
HTTP authentication(optional)
Configure the Default Directory for accessing the
web-based SMM. (the default
than IPNext190 v8.47.024: /hd)
* Change the setting of http document–root to /hd
if you need to upgrade a version lower than
v8.47.024 to a version higher than v8.47.024
(The default setting of the version older than
IPNext50 v8.47.024 : /hd/smartclient)
version higher
132 - 109