IPNext 190 System Installation Guide
Administrator Mode Commands
Only the administrator, who logs into the gateway, can use the commands in the administrator mode. To use
this command, you must log in to the gateway by the root account. An entrance to the configuration of the
gateway is possible only when you log in as administrator mode.
At the administrator, all the commands in the user mode can be used.
The prompt for the administrator mode can be displayed as 'IP-PBX#'.
Command
clear
clock
configure
copy
debug
disable
disconnect
dnsquery
dnsrv
end
erase
exit
fsh
ftp
help
no
nsupdate
ntpdate
ping
ping6
quit
reboot
show
telnet
Table 3-2 Administrator Mode Commands
Initializes the initial counter and statistics
Sets the present year, date and time
Enters to the configuration mode
Copies running config to startup config
Debugs the overall system
Enters to the user mode
Closes VTY connection
Used for DNS Query test
Used for DNS SRV Record Test
Enters to the administrator mode
Deletes config file
Moves to a notch previous mode from the present
Enter File Shell
Displays APOS help screen
Deletes the present configuration
Transmits updated information to Name Server
Receives the clock information from ntp server
Checks the network connection (IPv4)
Checks the network connection (IPv6)
Equals to exit
Reboots the system
Checks the present status of the configuration
Connects remotely
Sets to display the terminal and debussing information
AddPac Technology Proprietary & Documentation
Description
132 - 43
Need help?
Do you have a question about the IPNext190 and is the answer not in the manual?