Page 1 AP-VP280 BcN IP Video Phone Installation and Operation Guide Release 1.10 Headquarters AddPac Technology Co. Ltd. 2F, Jeong-Am Bldg, 769-12 Yeoksam-dong, Kangnam-gu Seoul, 135-080, Korea http://www.addpac.com Tel: +82.2.568.3848 Fax: +82.2.568.3847...
Page 2 In no event shall AddPac or its suppliers disclaim all warranties, expressed or implied, including, without limitation, lost profits or loss or damage to data arising out of the use or inability to use this manual. For detail specification, information or sales and warranty, please contact Technical Sales division of AddPac.
Page 3: Table Of Contents
AP-VP280 BcN Video Phone, Release 1.10 C O N T E N T S About this guide..........................16 Product Overview...... 18 Chapter 1. Software Features ..........................22 Physical Description-Rear View ....................... 26 Preparing for Installation ... 28 Chapter 2. Safety Recommendations ......................... 28 Maintaining Safety with Electricity ....................
Page 4 AP-VP280 BcN Video Phone, Release 1.10 Tool Box – Date and Time ......................... 86 Tool Box - Save All ..........................89 Tool Box - Factory Default......................... 92 Tool Box - Ring ........................... 95 Tool Box - Power Save........................97 Tool Box - Information ........................99 Tool Box - Language........................
Page 5 AP-VP280 BcN Video Phone, Release 1.10 Console Commands ....249 Chapter 5. Basic Commands for Configuring Network Settings ..............249 Video Mode Command List ......................251 Selecting External Audio Input Port Mode ..................252 Adjusting Gain Value of External Audio Input Port ..............252 Amplifying Microphone of External Audio Input Port ..............
Page 6 AP-VP280 BcN Video Phone, Release 1.10 F I G U R E S (Figure 1-1) Network Configuration of the AP-VP280 in the System Architecture ...... 20 (Figure 1-2) Front view........................24 (Figure 1-3) Rear View........................26 (Figure 2-1) AP-VP280 BcN IP Video Phone Remote Control ............32 (Figure 3-1) Connecting WAN......................
Page 7 AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-25) Specifying IP Address ....................63 (Figure 4-26) Selecting the Option for Video Codec ............... 64 (Figure 4-27) Selecting the Option for Audio Codec............... 64 (Figure 4-28) Selecting the Option for Image Size ................65 (Figure 4-29) Selecting the Option for Frame Rate .................
Page 8 AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-63) Press OK on the Keypad to Confirm Your Selection of Saving......90 (Figure 4-64) Verifying the Display of ‘Writing success’ message..........91 (Figure 4-65) Factory Default Menu Section ..................92 (Figure 4-66) Menu >> Tool Box >> Factory Default ............... 93 (Figure 4-67) Select Factory Default and press OK for 3 seconds..........
Page 9 AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-102) Screen Layout of Display Menu Details ..............118 (Figure 4-103) Adjusting the Settings for Camera Input Screen...........119 (Figure 4-104) Av Setup >>Display ....................120 (Figure 4-105) Display >> Camera Setting0 ................... 120 (Figure 4-106) Adjusting Brightness ....................121 (Figure 4-107) Adjusting the Settings for Display Screen............
Page 10 AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-141) Setting Screen for Pan/Tilt/Zoom................145 (Figure 4-142) Network & Call Menu Category ................146 (Figure 4-143) Internet Setup Menu Detail ..................148 (Figure 4-144) Network & Call >> Internet Setup................149 (Figure 4-145) Select DHCP then press OK ................... 149 (Figure 4-146) Network &...
Page 11 AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-180) Entering SIP User Password .................. 170 (Figure 4-181) Entering the IP address of SIP Primary Server............. 171 (Figure 4-182) Entering the IP Address of SIP Secondary Server ..........171 (Figure 4-183) Selecting the Option for Enabling Register E.164 then Pressing F2 to save ..172 (Figure 4-184) H.323 Protocol Menu Details ..................
Page 12 AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-218) Menu >> Network & Call >> Service............... 199 (Figure 4-219) Service Port Setup Menu Details ................199 (Figure 4-220) Auto-Upgrade Menu Details..................200 (Figure 4-221) Menu >> Network >> Auto Upgrade............... 202 (Figure 4-222) Auto Upgrade Menu....................
Page 13 AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-257) List of Available Conference Rooms for Placing a Conference Call....224 (Figure 4-258) Making a Conference Call..................225 (Figure 4-259) DVR List Browser ....................226 (Figure 4-260) Menu >> Applications>> DVR Live ................ 227 (Figure 4-261) DVR Camera Image Menu ..................
Page 14 AP-VP280 BcN Video Phone, Release 1.10 T A B L E S [Table 1-1] Hardware Specifications....................21 [Table 1-2] Software Specifications....................22 [Table 1-3] Description of the Button Features ................25 [Table 1-4] Description of the Connectors on the Rear Side ............27 [Table 2-1] Product Package ......................
Page 15 AP-VP280 BcN Video Phone, Release 1.10 [Table 4-30] Description of PSTN Prefix Menu Option ..............182 [Table 4-31] Description of Call Forward Menu Options .............. 186 [Table 4-32] Description of DND Menu Options ................188 [Table 4-33] Description of Call Wait Setup Menu Options............190 [Table 4-34] Description of Auto Response Menu Options............
Page 16: About This Guide
This section discusses document objectives, document organization, targeted audience. Document Objectives The purpose of this document is to assist the users install and operate the AddPac AP-VP280 video phone easily. This guide describes the initial site preparation, hardware installation and troubleshooting of the AddPac AP-VP280 video phone.
Page 17 This table describes the contents of each chapter in this document. Table 1 Document Organization Chapter Title Description Overview of the features of the AP-VP280, and describes its Chapter 1 Introduction hardware and software specification Describes the environment required for the AP-VP280...
Page 18: Chapter 1. Product Overview
Since AP-VP280 supports networks of 64 Kbps to several Mbps, it is available at any Internet-enabled place. Above all, AP-VP280 ensures the best video quality due to the ‘rate control’ function that ensures the best video quality and frame rate at a limited bandwidth and the high-end error resilience technology for troubleshooting various packet failures on the Internet.
Page 19 USB hub. A separate power supply device should be used for a USB device that requires much power consumption since limited power is supplied to the USB device. If USB memory is used, AP-VP280 enables a file browser, and decodes MP3, JPEG, PMA (video stream format of AddPac) files. Video data that require much memory can be saved in external USB memory.
Page 20: (Figure 1-1) Network Configuration Of The Ap-Vp280 In The System Architecture
AP-VP280 BcN Video Phone, Release 1.10 (Figure 1-1) Network Configuration of the AP-VP280 in the System Architecture AddPac Technology Proprietary & Documentation...
Page 21: [Table 1-1] Hardware Specifications
AP-VP280 BcN Video Phone, Release 1.10 Hardware Features [Table 1-1] Hardware Specifications High-performance RISC CPU Architecture High-performance programmable DSP Flash Memory 16MB Memory Main Memory 64MB Boot Memory 512Kbyte Flash Memory LAN0 Port One(1) 10/100 Mbps Fast Ethernet for WAN...
Page 22: Software Features
AP-VP280 BcN Video Phone, Release 1.10 Software Features [Table 1-2] Software Specifications Static and IEEE 802.1Q VLAN Routing LAN Protocol WAN Protocol Point-to-Point Protocol (PPPoE for ADSL), DHCP, and Static IP Codec MPEG4, H.263, H.264, JPEG (Still Image) QCIF(176x144), CIF(352x288), QVGA(320x240),...
Page 23 AP-VP280 BcN Video Phone, Release 1.10 Management Debugging, System Auditing, and Diagnostics Support System Booting and Auto-rebooting with Watchdog Feature System Managements with Data Logging IP Traffic Statistics with Accounting DHCP Server & Relay Functions Network Address Translation (NAT) Function...
Page 24: (Figure 1-2) Front View
AP-VP280 BcN Video Phone, Release 1.10 Physical Description-Front View The hard case of the AP-VP280 is a standalone type of network product, which is made of high-strength ABS. The main key buttons are place on the front panel of this product, you can operate just about any and all system operations by using the key buttons.
Page 25: [Table 1-3] Description Of The Button Features
AP-VP280 BcN Video Phone, Release 1.10 This table shows and describes the button features on the front side of your AP-VP280. [Table 1-3] Description of the Button Features Name Description SpeedDial Brings out the Speed Dial menu. F1~F4 Engages the function keys assigned to each of the soft key tab displayed on the bottom of the LCD screen when the menus such as PhoneBook and SpeedDial are used.
Page 26: Physical Description-Rear View
AP-VP280 BcN Video Phone, Release 1.10 Physical Description-Rear View The rear panel of AP-VP280 has two 10/100Mbps Fast Ethernet interfaces for WAN/LAN access, the PSTN port for accommodating the regular Central Office line, video I/O port and audio I/O port, which connect to video and acoustic devices, as well as the RS-232C port, which allows you to access the console for device management and camera control.
Page 27: [Table 1-4] Description Of The Connectors On The Rear Side
AP-VP280 BcN Video Phone, Release 1.10 [Table 1-4] Description of the Connectors on the Rear Side Name Description Power Switch DC 5V 5A DC 5V 5A adapter port Universal Serial Bus connector in the standard of 1.1 for transmitting 12Mbps at maximum and connecting to USB memory devices.
Page 28: Chapter 2. Preparing For Installation
Keep the area around the AP-VP280 as free from dust as is practical before and after installation.. When you need to open the cover of the AP-VP280, please place the equipment on a flat and safe place. When you work on the equipment, please do not wear any loose clothes. When you wear a tie or scarf, please be careful not to slip down and roll up the sleeves because if you don’t,...
Page 29 AP-VP280 BcN Video Phone, Release 1.10 • Avoid placing objects on top of the equipment. • Install the equipment in a cool location avoiding direct sunlight. • Maintain distance from flammable, chemical, or magnetic objects AddPac Technology Proprietary & Documentation...
Page 30: Requirements For Network Connection
RS232C console cable with RJ-45 connector (included in the box Ethernet Port The AP-VP280 has two RJ45 type of 10/100 BaseTX Ethernet ports on the rear side and LED for indicating the status of the port on the front. These ports are physically connected and using the direct cable you can connect to LAN0/ LAN1.
Page 31: Package Contents
AP-VP280 BcN Video Phone, Release 1.10 Package Contents Completely unpack all of the contents from the box and inspect each item for damage and ensure that you have all of the components listed below: [Table 2-1] Product Package Name Contents...
Page 32: (Figure 2-1) Ap-Vp280 Bcn Ip Video Phone Remote Control
AP-VP280 BcN Video Phone, Release 1.10 Remote Control Button Features (Figure 2-1) AP-VP280 BcN IP Video Phone Remote Control AddPac Technology Proprietary & Documentation...
Page 33: [Table 2-2] Remote Control Button Features
Soft keys that can change the function of each OSD menu for the external camera F1~F4 (applied to only EVI-D70 and 100) of the other party’s AddPac video devices in the remote location such as the AddPac Video Conferencing Servers (AP- VC1000, AP-VC2000) or Video Gateway.
Page 34 (16) SLOW/PLAY/ Functions VoD Browser. File Browser. This button feature can be used only PAUSE/STOP/ when your AP-VP280 is connected with AddPac Video on Demand server such PREV/FR/FF/ as AP-VD1000 in the remote location NEXT AddPac Technology Proprietary & Documentation...
Page 35: Chapter 3. Installing
AP-VP280 BcN Video Phone, Release 1.10 Chapter 3. Installing Connecting Ethernet • A connection to Internet is made through the LAN interface of the WAN accessing equipment such as router, ADSL or cable modem. The LAN is connected by RJ45 standard of the UTP cable.
Page 36: (Figure 3-2) Connecting Lan
AP-VP280 BcN Video Phone, Release 1.10 • When LAN1 is set to IP-Share mode, it is connected to PC on Direct-Through cable. • Use Direct-Through cable to connect to PC directly • User Cross-Over cable to connect to the hub directly...
Page 37: Connecting Pstn (Optional)
AP-VP280 BcN Video Phone, Release 1.10 Connecting PSTN (Optional) This PSTN port is used for connecting PSTN Central Office line in case of a network failure. The user may connect the PSTN cable to the PSTN port in order to implement PSTN backup.
Page 38: Connecting Composite Rca Video Input Port
DVD player. This video input port has S-Video, composite RCA types. So any video device with the composite RCA video output port can be connected to AP-VP280. The following figure shows a connection with the video camera by using the composite RCA video cable.
Page 39: Connecting Composite Rca/S-Vhs Video Output
The available video output ports are categorized by Composite RCA, S-VHS and Component. The AP-VP280 is capable of displaying the video image to these 3 different types of interface simultaneously. All you have to do is just find and connect the matching type of cable.
Page 40: Connecting Composite Rca Video Input Port
DVD player. This video input port has S-Video, composite RCA types. So any video device with the composite RCA video output port can be connected to AP-VP280. The following figure shows a connection with the video camera by using the composite RCA video cable.
Page 41: Connecting Composite Rca/S-Vhs Video Output Port
The available video output ports are categorized by Composite RCA, S-VHS and Component. The AP-VP280 is capable of displaying the video image to these 3 different types of interface simultaneously. All you have to do is just find and connect the matching type of cable.
Page 42: Connecting Usb Port
AP-VP280 BcN Video Phone, Release 1.10 Connecting USB Port The USB port of AP-VP280 is based on the standard of 1.1, which can transmit data at 12Mbps. The user can connect to the USB memory drive and Table 3-1 describes its usage. However, a standalone type of hard disk drive may not operate when enough power is not supplied.
Page 43: Chapter 4. Configuring Oad
AP-VP280 BcN Video Phone, Release 1.10 Chapter 4. Configuring OAD Startup The following figure shows the start of booting screen of the AP-VP280 when the power is turned on. (Figure 4-1) Startup Booting Screen AddPac Technology Proprietary & Documentation...
Page 44: Default Screen Layout
AP-VP280 BcN Video Phone, Release 1.10 Default Screen Layout The following figure shows layout display of basic screen, after the startup booting screen is finished. (Figure 4-2) Default Screen Layout AddPac Technology Proprietary & Documentation...
Page 45: [Table 4-1] Description Of Layout Display Of Basic Screen
Top Info Bar View Mode Local View: The default screen while AP-VP280 is not in use for a video call. The basic image of the video input is displayed Remote View : Displaying the video image transmitted from the other party during...
Page 46: Menu Composition
AP-VP280 BcN Video Phone, Release 1.10 Menu Composition When you press the menu button of the remote control, you can see the menu in the following figure. By using this menu, you can set up all the functions except pan/tilt of remote camera, changing the layout and verifying call status, which can be during online call state.
Page 47: [Table 4-2] Description Of Main Menu Items
AV Setup is the essential menu for the AP-VP280, which configures the settings for audio input and output volume, the color and brightness adjustments, voice codec selection, video codec selection and audio input an output properties.
Page 48: Using Input Mode
AP-VP280 BcN Video Phone, Release 1.10 Using Input Mode Input Mode takes the entry for some texts, numbers, special characters by using remote control. The Input Mode is used for managing Phonebook, account and IP address entry in network configuration settings, so you should know thoroughly. Each function key corresponds to F1~F4 of the remote control.
Page 49: [Table 4-3] Description Of Input Mode
AP-VP280 BcN Video Phone, Release 1.10 [Table 4-3] Description of Input Mode Name Description Character Set (F4) To input letters in OSD by using the remote control, use Character Set. By using 4 function buttons of the remote control, you can have 6 different kinds of character sets as they are shown in Figure 4-5.
Page 50: (Figure 4-5) Changing The Input Mode By Pressing F4 On The Remote Control
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-5) Changing the Input Mode by Pressing F4 on the Remote Control AddPac Technology Proprietary & Documentation...
Page 51: Phonebook Menu
AP-VP280 BcN Video Phone, Release 1.10 Phonebook Menu Phonebook Menu is a phone directory and it consists of Name or Number Search, Phone Number Registration, Recent Call, Speed Dial: (Figure 4-6) Phonebook Menu AddPac Technology Proprietary & Documentation...
Page 52: [Table 4-4] Description For Composition Of Phonebook Menu Sections
AP-VP280 BcN Video Phone, Release 1.10 [Table 4-4] Description for Composition of Phonebook Menu Sections Menu Category Description Searches a phone number by using a registered name in the Phonebook. The user can enter the name by using the remote control to find the phone number and then press Call on the remote control to place a call.
Page 53: Phonebook - Search
AP-VP280 BcN Video Phone, Release 1.10 Phonebook - Search Figure 4-7 shows the screen by locating OSD>> Phonebook>> Search. The Search by Name menu searches the other party’s name or number which has been saved. Thus, whenever the user enters a letter of a name by using the remote control, the search moves to the matching field of the name.
Page 54: (Figure 4-8) Phonebook >> Name
AP-VP280 BcN Video Phone, Release 1.10 Figure 4-8 shows searching a specific name from the Name Search Menu by using the remote control: (Figure 4-8) Phonebook >> Name (Figure 4-9) Search Menu Section AddPac Technology Proprietary & Documentation...
Page 55: (Figure 4-10) Selecting Search By Name Menu Detail
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-10) Selecting Search by Name Menu Detail (Figure 4-11) Entering ‘Addpac’ from the Character Set AddPac Technology Proprietary & Documentation...
Page 56: (Figure 4-12) Placing A Call To Addpac Which Has Been Selected
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-12) Placing a Call to AddPac which Has Been Selected AddPac Technology Proprietary & Documentation...
Page 57: (Figure 4-13) Search By Number
AP-VP280 BcN Video Phone, Release 1.10 Figure 4-13 shows searching a specific number from the Search menu by using the keypad: (Figure 4-13) Search by Number (Figure 4-14) Enter the phone number of ‘2000’ AddPac Technology Proprietary & Documentation...
Page 58: (Figure 4-15) Automatically Searching The Phone Number Starting With 1003
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-15) Automatically searching the phone number starting with 1003 (Figure 4-16) Selecting Modify Mode by Pressing F1 on the Keypad AddPac Technology Proprietary & Documentation...
Page 59: Phonebook - Registration
AP-VP280 BcN Video Phone, Release 1.10 Phonebook - Registration Figure 4-17 shows the screen for selecting OSD>> Phonebook>> Registration. The Registration Menu is to add a new phone number to the Phonebook. The user enters the other party’s name, number, IP Address for registration. Once the phone number is saved, the Speed Dial Number is registered automatically.
Page 60: (Figure 4-18) Phonebook >> Registration
AP-VP280 BcN Video Phone, Release 1.10 Figure 4-18 shows an example for registering a new number by using the remote control. (Figure 4-18) Phonebook >> Registration (Figure 4-19) Registration AddPac Technology Proprietary & Documentation...
Page 61: (Figure 4-20) Entering A Name By Using F4 And The Numeric Key On The Keypad
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-20) Entering a Name by Using F4 and the Numeric Key on the Keypad (Figure 4-21) Selecting a Group by Using Navigation Key AddPac Technology Proprietary & Documentation...
Page 62: (Figure 4-22) Entering A Phone Number
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-22) Entering a Phone Number (Figure 4-23) Entering a Speed Dial Number by Using the Navigation and Keypad AddPac Technology Proprietary & Documentation...
Page 63: (Figure 4-24) Selecting Advanced Setup By Using F3 On The Keypad
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-24) Selecting Advanced Setup by using F3 on the Keypad (Figure 4-25) Specifying IP Address AddPac Technology Proprietary & Documentation...
Page 64: (Figure 4-26) Selecting The Option For Video Codec
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-26) Selecting the Option for Video Codec (Figure 4-27) Selecting the Option for Audio Codec AddPac Technology Proprietary & Documentation...
Page 65: (Figure 4-28) Selecting The Option For Image Size
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-28) Selecting the Option for Image Size (Figure 4-29) Selecting the Option for Frame Rate AddPac Technology Proprietary & Documentation...
Page 66: (Figure 4-30) Pressing Ok And Then Pressing F2 To Save
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-30) Pressing OK and then Pressing F2 to Save AddPac Technology Proprietary & Documentation...
Page 67: Phonebook - Contact Group
AP-VP280 BcN Video Phone, Release 1.10 Phonebook – Contact Group Figure 4-31 displays the screen by selecting Menu >> Phonebook >> Contact Group. The Contact Group menu section specifies, saves and modifies the group with the registered phone numbers. The user may create a new group or edit the existing group to select the...
Page 68: (Figure 4-32) Phonebook >> Contact Group
AP-VP280 BcN Video Phone, Release 1.10 Figure 4-32 shows the example for creating a new group from the Contact Group menu section. (Figure 4-32) Phonebook >> Contact Group (Figure 4-33) Contact Group Menu Details AddPac Technology Proprietary & Documentation...
Page 69: (Figure 4-34) Editing Contact Group Menu Settings
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-34) Editing Contact Group Menu Settings (Figure 4-35) Selecting the Terminal of the Selected Group AddPac Technology Proprietary & Documentation...
Page 70: Phonebook - Button List
AP-VP280 BcN Video Phone, Release 1.10 Phonebook – Button List Figure 4-36 shows the screen after selecting Menu >> Phonebook >> Button List. The Button List Menu section configures the setting for Speed Button List. This menu section also verifies and modifies Speed Dial List configured to the server by using the button profile menu from Presence Server.
Page 71: (Figure 4-37) Phonebook >> Button List
AP-VP280 BcN Video Phone, Release 1.10 Modifying the Speed Dial List from the Button List Menu Section is shown from Figure 4- (Figure 4-37) Phonebook >> Button List (Figure 4-38) Button List Menu Details AddPac Technology Proprietary & Documentation...
Page 72: (Figure 4-39) Select 'Test_1' From The Button Menu Details
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-39) Select ‘Test_1’ from the Button Menu Details (Figure 4-40) The Phone Information of the Selected Phone Number AddPac Technology Proprietary & Documentation...
Page 73: (Figure 4-41) Specifying The Icon For The Selected Phone Number
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-41) Specifying the Icon for the Selected Phone Number (Figure 4-42) Specifying the Softkey for the Selected Phone Number to be Used for Speed Dail AddPac Technology Proprietary & Documentation...
Page 74: Phone Book - Recent Call
AP-VP280 BcN Video Phone, Release 1.10 Phone Book - Recent Call Figure 4-43 shows Recent Call by selecting OSD >> Phone Book >> Recent Call. Recent Call display the other party’s information for details of all incoming and outgoing calls, including the time of the calls. The user may be able to choose a number to call from the Recent Calls List and checks a call during one’s absence and save the...
Page 75: [Table 4-5] Description Of Recent Call Menu Details
AP-VP280 BcN Video Phone, Release 1.10 Table 4-5 describes the Recent Call menu options in Figure 4-43. [Table 4-5] Description of Recent Call Menu Details Menu Detail Description Displays an incoming voice call. Incoming/ Outgoing Displays an unanswered incoming voice call.
Page 76: (Figure 4-44) ) Phonebook >> Recent Call
AP-VP280 BcN Video Phone, Release 1.10 The following figures show an example of placing a call by using the incoming call information from the Recent Call. (Figure 4-44) ) Phonebook >> Recent Call (Figure 4-45) Recent Call Menu Details AddPac Technology Proprietary & Documentation...
Page 77: Phonebook - Button Profile
AP-VP280 BcN Video Phone, Release 1.10 Phonebook Button Profile – The Button Profile can be verified by the Speed Button List configured to Presence Server from the terminal. (Figure 4-46) Screen Layout of Button Profile Menu Section AddPac Technology Proprietary & Documentation...
Page 78: (Figure 4-47) Phonebook >> Button Profile
AP-VP280 BcN Video Phone, Release 1.10 The following figures show the example of configuring Button Profile. (Figure 4-47) Phonebook >> Button Profile (Figure 4-48) Selecting “PS_test” from the Button Profile Menu Details AddPac Technology Proprietary & Documentation...
Page 79: (Figure 4-49) Loading The Button Profile Of 'Ps Test
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-49) Loading the Button Profile of ‘PS Test’ AddPac Technology Proprietary & Documentation...
Page 80: Phonebook - Initialize Pb
AP-VP280 BcN Video Phone, Release 1.10 Phonebook Initialize PB – Figure 4-50 shows the screen after selecting Menu >> Phonebook >> Initialize. The Initialize menu section initializes the contents and settings of the Phonebook which have been saved up to the present. After the Phonebook menu category is initialized, the AP- VP280 starts rebooting by itself.
Page 81: (Figure 4-51) Selecting Phonebook >> Initialize Pb
AP-VP280 BcN Video Phone, Release 1.10 The following figures show the example for initializing the Phonebook. (Figure 4-51) Selecting Phonebook >> Initialize PB (Figure 4-52) Initializing the Phonebook AddPac Technology Proprietary & Documentation...
Page 82: (Figure 4-53) Verifying The Initialized Phonebook_1
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-53) Verifying the Initialized Phonebook_1 (Figure 4-54) Verifying the Initialized Phonebook_2 AddPac Technology Proprietary & Documentation...
Page 83: (Figure 4-55) Rebooting After The Phonebook Is Initialized
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-55) Rebooting after the Phonebook is Initialized (Figure 4-56) Rebooting AddPac Technology Proprietary & Documentation...
Page 84: Tool Box Menu
AP-VP280 BcN Video Phone, Release 1.10 Tool Box Menu Tool Box is organized by Date & Time, Save all, Factory Default, Ring, Power Save. (Figure 4-57) Tool Box Menu Category AddPac Technology Proprietary & Documentation...
Page 85: [Table 4-6] Composition Of Tool Box Menu Sections
Description Takes the time entry and changes Saves all the changes have been made in OSD Initializes the settings of AP-VP280 to the factory default. Changes the ringer sound of AP-VP280 Power Saving options for LCD/ Camera. Informs the version of the firmware.
Page 86: Tool Box - Date And Time
AP-VP280 BcN Video Phone, Release 1.10 Tool Box – Date and Time This menu configures the settings for Date&Time of AP-VP280. You can use the remote control to enter the date and time and press F2 to save afterwards. (Figure 4-58) Date&Time Menu Details...
Page 87: (Figure 4-59) Menu >> Tool Box >> Date &Time
AP-VP280 BcN Video Phone, Release 1.10 The following figures show the example for using the keypad to change the settings of Date and Time. (Figure 4-59) Menu >> Tool Box >> Date &Time (Figure 4-60) Date and Time Menu Details...
Page 88: [Table 4-7] Description Of Date And Time Menu Details
AP-VP280 BcN Video Phone, Release 1.10 [Table 4-7] Description of Date and Time Menu Details Category Description Year Enter the present year of the system Month Enter the present month of the system Enter the present day of the system...
Page 89: Tool Box - Save All
AP-VP280 BcN Video Phone, Release 1.10 Tool Box - Save All This command saves the values which have been entered in OSD. The values are still saved as they are even after the reboot of AP-VP280. (Figure 4-61) Save All Main Screen...
Page 90: (Figure 4-62) Menu >> Tool Box >> Save All
AP-VP280 BcN Video Phone, Release 1.10 The following figures show configuring settings for the Save All menu details. (Figure 4-62) Menu >> Tool Box >> Save All (Figure 4-63) Press OK on the Keypad to Confirm Your Selection of Saving...
Page 91: (Figure 4-64) Verifying The Display Of 'Writing Success' Message
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-64) Verifying the Display of ‘Writing success’ message AddPac Technology Proprietary & Documentation...
Page 92: Tool Box - Factory Default
AP-VP280 BcN Video Phone, Release 1.10 Tool Box - Factory Default This command is not recommended for use unless the user really needs to erase and reset all contents of Configuration, Phonebook and Recent Call. (Figure 4-65) Factory Default Menu Section...
Page 93: (Figure 4-66) Menu >> Tool Box >> Factory Default
AP-VP280 BcN Video Phone, Release 1.10 The following figures show the example for resetting all the settings to Factory Default. (Figure 4-66) Menu >> Tool Box >> Factory Default (Figure 4-67) Select Factory Default and press OK for 3 seconds...
Page 94: (Figure 4-68) All The Settings Are Erased And Automatically Reset And Reboot
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-68) All the settings are erased and automatically reset and reboot AddPac Technology Proprietary & Documentation...
Page 95: Tool Box - Ring
AP-VP280 BcN Video Phone, Release 1.10 Tool Box - Ring Ring menu provides 11 different kinds of sounds for the incoming call including the mute. The user may use F1 key (Play to listen the sounds and choose the one that the user like.
Page 96: (Figure 4-70) Menu >> Tool Box >> Ring
AP-VP280 BcN Video Phone, Release 1.10 The following figures present the example for selecting a ringer sound by using the keypad. (Figure 4-70) Menu >> Tool Box >> Ring (Figure 4-71) Selecting a Ringer Sound in the Ring Menu Details...
Page 97: Tool Box - Power Save
AP-VP280 BcN Video Phone, Release 1.10 Tool Box - Power Save The Power Saving turns off the LCD screen and the built-in camera automatically, in a time specified by the user. By touching the touchscreen or pressing any button on the keypad, the user can turn on the screen and camera.
Page 98: (Figure 4-73) Menu >> Tool Box >> Power Save
AP-VP280 BcN Video Phone, Release 1.10 As it is shown in Figure 4-73, the user may choose one of the time options, which are 15 seconds, 30 seconds, 1 minute, 3 minutes and 10 minutes (default setting: 30 seconds). (Figure 4-73) Menu >> Tool Box >> Power Save (Figure 4-74) Power Save Menu Details AddPac Technology Proprietary &...
Page 99: Tool Box - Information
AP-VP280 BcN Video Phone, Release 1.10 Tool Box - Information This menu verifies the present version of the software (firmware of the AP-VP280. (Figure 4-75) Information Menu Details AddPac Technology Proprietary & Documentation...
Page 100: (Figure 4-76) Menu >> Tool Box >> Information
Displaying the Version Information [Table 4-8] Description of Information Menu Details Name Description SW Name The file name of the firmware being implanted to the AP-VP280 SW Version The version name being implanted to the AP-VP280 AddPac Technology Proprietary & Documentation...
Page 101: Tool Box - Language
AP-VP280 BcN Video Phone, Release 1.10 Tool Box - Language This menu verifies the language in use and selects the choice of language for the AP-VP280. (Figure 4-78) Language Menu Details AddPac Technology Proprietary & Documentation...
Page 102: (Figure 4-79) Menu >> Tool Box >> Language
AP-VP280 BcN Video Phone, Release 1.10 The following figures present the example for verifying the information on Language and make your selection of the given language (English or Korean): (Figure 4-79) Menu >> Tool Box >> Language (Figure 4-80) Language Setup Menu Details...
Page 103: Tool Box - Admin Lock
AP-VP280 BcN Video Phone, Release 1.10 Tool Box – Admin Lock Admin Lock blocks an entry to a specific menu and changes the password. The password is set to 2337 at default. Changing the password is not recommended. (Figure 4-81) Admin Lock Menu Options...
Page 104: (Figure 4-82) Menu >> Tool Box >> Adminlock
AP-VP280 BcN Video Phone, Release 1.10 The following figures present some examples for setting up Admin Lock by using the keypad. (Figure 4-82) Menu >> Tool Box >> AdminLock (Figure 4-83) Enter a password for Admin Lock AddPac Technology Proprietary & Documentation...
Page 105: (Figure 4-84) Menu >> Tool Box >> Admin Lock
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-84) Menu >> Tool Box >> Admin Lock (Figure 4-85) Select the option for Use Password AddPac Technology Proprietary & Documentation...
Page 106: (Figure 4-86) Select Change Password
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-86) Select Change Password (Figure 4-87) Replace the old password with the new one AddPac Technology Proprietary & Documentation...
Page 107: (Figure 4-88) Select Admin Lock Option
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-88) Select Admin Lock Option (Figure 4-89) Choose the options for Admin Lock AddPac Technology Proprietary & Documentation...
Page 108: [Table 4-10] Description Of Admin Lock Menu Options
AP-VP280 BcN Video Phone, Release 1.10 [Table 4-10] Description of Admin Lock Menu Options Menu Option Description Admin Lock Enters Admin Lock setup mode Change Password Changes the password for Admin Lock Factory default Locks up [Tool Box]-[Factory Default] menu Internet Setup Locks up [Network &...
Page 109: (Figure 4-90) User Lock Menu Options
AP-VP280 BcN Video Phone, Release 1.10 Tool Box – User Lock User Lock sets limit to a specific incoming/ outgoing call or menu option of AP-VP280 and changes the password. The password is set to 0000 at default. (Figure 4-90) User Lock Menu Options...
Page 110: (Figure 4-91) Scroll Down On The Main Menu As Of Menu >> Tool Box >> User Lock
AP-VP280 BcN Video Phone, Release 1.10 The following figures present some example of User Lock by using the keypad. (Figure 4-91) Scroll down on the main menu as of Menu >> Tool Box >> User Lock (Figure 4-92) Select the options for User Lock menu...
Page 111: (Figure 4-93) Select The Option For Use User Lock
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-93) Select the option for Use User Lock (Figure 4-94) Select Change Password AddPac Technology Proprietary & Documentation...
Page 112: (Figure 4-95) Change The Password
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-95) Change the password (Figure 4-96) Select User Lock menu option AddPac Technology Proprietary & Documentation...
Page 113: (Figure 4-97) Select The Options For User Lock
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-97) Select the options for User Lock [Table 4-11] Description of User Lock Menu Options Menu Options Descriptions User Lock Enters User Lock setup mode Change Password Changes the password for User Lock...
Page 114: Av Setup Menu
AP-VP280 BcN Video Phone, Release 1.10 AV Setup Menu Audio/ Video Setup menu configures the basic settings for video call and conference. This menu has Bandwidth, IO Ports, Camera and Display. The features of this menu are mainly dealt with the video and audio.
Page 115: [Table 4-12] Description For Composition Of Av Setup Menu Sections
Description Configures the setting of both local and remote cameras and Pan/Tilt for the video call by connecting the external camera to the AP-VP280. Adjusts the ring volume for the built-in speaker volume and audio input and output port volume. The user may adjust the volume by moving along with the slide type of bar.
Page 116: Av Setup - Volume
AP-VP280 BcN Video Phone, Release 1.10 AV Setup Volume Volume menu section adjusts the volumes of the Audio Input and output, built-in speaker and microphone amplification. (Figure 4-99) Volume Menu Details [Table 4-13] Description of Volume Menu Details Menu Details...
Page 117: (Figure 4-100) Av Setup >> Volume
AP-VP280 BcN Video Phone, Release 1.10 The example for adjusting the volume level for the Audio Input and Output ports are shown from Figure 4-100. The user may control the level by using the left/right navigation key on the remote control.
Page 118: Av Setup - Display
AP-VP280 BcN Video Phone, Release 1.10 AV Setup - Display Display setup has Camera/ External Input (for the built-in camera and composite RCA video input and Monitor Output (for the built-in LCD and composite RCA video output or S-VHS. Camera/ External Input consists of brightness and Saturation. Monitor Output consists of SD, HD and LCD.
Page 119: (Figure 4-103) Adjusting The Settings For Camera Input Screen
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-103) Adjusting the Settings for Camera Input Screen [Table 4-15] Description of Camera Setting Menu Options Menu Option Description Brightness Adjusts Brightness of Camera Input. 255 is the maximum value and 128 is set at default.
Page 120: (Figure 4-104) Av Setup >>Display
AP-VP280 BcN Video Phone, Release 1.10 The following figures present the example for adjusting the settings of camera input screen. (Figure 4-104) Av Setup >>Display (Figure 4-105) Display >> Camera Setting0 AddPac Technology Proprietary & Documentation...
Page 121: (Figure 4-106) Adjusting Brightness
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-106) Adjusting Brightness AddPac Technology Proprietary & Documentation...
Page 122: (Figure 4-107) Adjusting The Settings For Display Screen
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-107) Adjusting the Settings for Display Screen [Table 4-16] Description of Display Menu Options Menu Option Description Adjusts Brightness of Composite/S-Video video output. The maximum value is 255. Brightness 128 is set at default Adjusts Contrast of Composite/S-Video video output.
Page 123: (Figure 4-108) Av Setup >> Display
AP-VP280 BcN Video Phone, Release 1.10 The following figures present the example for adjusting the settings for display. (Figure 4-108) AV Setup >> Display (Figure 4-109) Display >> Display AddPac Technology Proprietary & Documentation...
Page 124: (Figure 4-110) Adjusting Brightness
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-110) Adjusting Brightness AddPac Technology Proprietary & Documentation...
Page 125: (Figure 4-111) Adjusting The Settings For Lcd Output
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-111) Adjusting the Settings for LCD Output [Table 4-17] Description of LCD Output Menu Options Menu Option Description Brightness Adjust the brightness for the LCD output. The brightness is set to 50 at default.
Page 126: (Figure 4-112) Av Setup >> Display
AP-VP280 BcN Video Phone, Release 1.10 The following figures present the example for adjusting the settings for the screen of LCD output. (Figure 4-112) AV Setup >> Display (Figure 4-113) Display >> LCD Output AddPac Technology Proprietary & Documentation...
Page 127: (Figure 4-114) Adjusting Brightness
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-114) Adjusting Brightness AddPac Technology Proprietary & Documentation...
Page 128: (Figure 4-115) Screen Layout For Audio Codec Types In Preference Order
AP-VP280 BcN Video Phone, Release 1.10 AV Setup – Audio Codec The available codec types for selection are G.711 [PCM, G.729 and G.723.1. These audio codec types are arranged in a different preference depending on the user’s environment. The user may select a set which can be most appropriate to the use’s network settings and one’s preference over...
Page 129: (Figure 4-116) Av Setup >> Audio Codec
AP-VP280 BcN Video Phone, Release 1.10 The example for specifying the audio codec is shown from Figure 4-102 below: (Figure 4-116) AV Setup >> Audio Codec (Figure 4-117) Changing the Preference Order of the Codec AddPac Technology Proprietary & Documentation...
Page 130: Av Setup - Video Codec
Video Codec is the menu which determines a video codec type to be used for a video call. The AP-VP280 supports MPEG-4, H.264 and H.263. The video quality of MPEG-4 tends to be better than H.263. H.263 has the resolution of QCIF and CIF, MPEG-4 has QVGA, HalfVGA and VGA.
Page 131: [Table 4-19] Description Of Video Codec Menu Details
H.263 QCIF(176x144), CIF(352x288) MPEG-4 QVGA(320x240), HalfVGA(640x240), VGA(640x480) H.264 QVGA(320x240) The maximum performance for using video codec of AP-VP280 for H.264 QVGA is limited to 1Mbps AddPac Technology Proprietary & Documentation...
Page 132: (Figure 4-119) Av Setup >> Video Codec
AP-VP280 BcN Video Phone, Release 1.10 The example for selecting a video codec type is shown by the following figures: (Figure 4-119) AV Setup >> Video Codec (Figure 4-120) Specifying Frame Rate AddPac Technology Proprietary & Documentation...
Page 133: (Figure 4-121) Selecting The First Option Of Video Codec To Mpeg4
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-121) Selecting the first option of Video Codec to mpeg4 (Figure 4-122) Specifying the Image Size for the First Option of mpeg4 AddPac Technology Proprietary & Documentation...
Page 134: (Figure 4-123) Specifying The Second Option Of Video Codec Option To H263
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-123) Specifying the Second Option of Video Codec Option to h263 (Figure 4-124) Selecting the Image Size for the Second Video Codec Option of h263 AddPac Technology Proprietary & Documentation...
Page 135: (Figure 4-125) Specifying The Third Option Of Video Codec To H264
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-125) Specifying the Third Option of Video Codec to h264 (Figure 4-126) Selecting the Image Size for the Third Video Codec Option of h264 AddPac Technology Proprietary & Documentation...
Page 136: Av Setup - Bandwidth
AP-VP280 BcN Video Phone, Release 1.10 AV Setup - Bandwidth This menu section determines a range of bandwidth to be used for a video call. (Figure 4-127) Bandwidth Menu Section [Table 4-20] Description of Bandwidth Menu Details Menu Detail Description...
Page 137: (Figure 4-128) Av Setup >> Bandwidth
AP-VP280 BcN Video Phone, Release 1.10 The example for specifying video bandwidth is shown in the following figures: (Figure 4-128) AV Setup >> Bandwidth (Figure 4-129) Specifying a Bandwidth Range AddPac Technology Proprietary & Documentation...
Page 138: (Figure 4-130) Specifying A Bandwidth Detail
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-130) Specifying a Bandwidth Detail AddPac Technology Proprietary & Documentation...
Page 139: Av Setup - I/O Ports
I/O Ports menu section configures the setting for audio input and output port of the AP-VP280 and the user can make one’s own choice for the settings. If necessary, audio input source can be used for the settings Mic or Line and audio output port supports the internal or external speaker.
Page 140: (Figure 4-132) Io Ports >> Io Ports
AP-VP280 BcN Video Phone, Release 1.10 The following figures present the example for configuring the settings for input and output port. (Figure 4-132) IO Ports >> IO Ports (Figure 4-133) Select Audio Input Port AddPac Technology Proprietary & Documentation...
Page 141: (Figure 4-134) Select Mic Input
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-134) Select Mic Input (Figure 4-135) Select Audio Output Port AddPac Technology Proprietary & Documentation...
Page 142: (Figure 4-136) Select Internal Speaker
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-136) Select Internal Speaker AddPac Technology Proprietary & Documentation...
Page 143: Av Setup - Camera
AP-VP280 BcN Video Phone, Release 1.10 AV Setup - Camera Camera menu section configures or changes the settings of both local and remote cameras. During a video call, the can change the setting of Pan/Tilt. (Figure 4-137) Screen Layout of Camera Menu Section...
Page 144: (Figure 4-138) Av Setup >> Camera
AP-VP280 BcN Video Phone, Release 1.10 The example for configuring the settings of Camera Control by using the keypad is presented from Figure 4-148. (Figure 4-138) AV Setup >> Camera (Figure 4-139) Selecting Camera Control AddPac Technology Proprietary & Documentation...
Page 145: (Figure 4-140) Executing Camera Control
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-140) Executing Camera Control (Figure 4-141) Setting Screen for Pan/Tilt/Zoom AddPac Technology Proprietary & Documentation...
Page 146: Network & Call Menu
Network & Call menu is composed of WAN, LAN Interface Setup, SIP/H.323 Signaling, FTP, QoS and other call options. You should know this menu thoroughly to use AP-VP280. This is a very important menu to optimize the settings of the configuration.
Page 147 Configures the setting for Call Forward, DND, Call Waiting and Auto-Answering. Assigns a caller’s number to an outbound call when the AP-VP280 has more than one number Enables or disables FTP, HTTP, TELNET, SNMP and changes TCP/ UDP port number...
Page 148: Network & Call - Internet Setup
AP-VP280 BcN Video Phone, Release 1.10 Network & Call - Internet Setup Internet Setup menu has the setting options of WAN interface. The user needs to adjust the settings on this menu to be adaptive to one’s environment because the network environment can be diversified.
Page 149: (Figure 4-144) Network & Call >> Internet Setup
AP-VP280 BcN Video Phone, Release 1.10 The following figures exhibit the method for selecting the DHCP menu option which commonly used for the cable modem settings: (Figure 4-144) Network & Call >> Internet Setup (Figure 4-145) Select DHCP then press OK...
Page 150: (Figure 4-146) Network & Call >> Internet Setup
AP-VP280 BcN Video Phone, Release 1.10 The following figures show the methods for selecting the static IP menu option. (Figure 4-146) Network & Call >> Internet Setup (Figure 4-147) Select Static IP AddPac Technology Proprietary & Documentation...
Page 151: Figure 4-148) Enter The Ip Address Of '61.33.161.87
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-148) Enter the IP Address of ’61.33.161.87’ (Figure 4-149) Enter the Netmask of ‘255.255.0.0’ AddPac Technology Proprietary & Documentation...
Page 152: Figure 4-150) Enter The Default Router Of '61.33.161.1
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-150) Enter the Default router of ’61.33.161.1’ (Figure 4-151) Enter the Primary DNS of ‘168.126.63.1’ AddPac Technology Proprietary & Documentation...
Page 153: (Figure 4-152) Enter The Secondary Dns Of '61.33.161.2' (Optional)
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-152) Enter the Secondary DNS of ’61.33.161.2’ (optional) (Figure 4-153) Pressing OK and then Moving to the Upper Menu AddPac Technology Proprietary & Documentation...
Page 154: (Figure 4-154) Network & Call >> Internet
AP-VP280 BcN Video Phone, Release 1.10 The following figures show the method of selecting PPPoE which is used for the application of ADSL: (Figure 4-154) Network & Call >> Internet (Figure 4-155) Selecting the Option for PPPoE AddPac Technology Proprietary & Documentation...
Page 155: (Figure 4-156) Selecting The Option For Pppoe Authentication Method
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-156) Selecting the Option for PPPoE Authentication Method (Figure 4-157) User Name and Password Entry AddPac Technology Proprietary & Documentation...
Page 156: (Figure 4-158) Pressing Ok And Then Moving To The Upper Menu
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-158) Pressing OK and then Moving to the Upper Menu AddPac Technology Proprietary & Documentation...
Page 157: (Figure 4-159) Network & Call >> Internet Setup
AP-VP280 BcN Video Phone, Release 1.10 The method for selecting the Static IPv6 is shown from Figure 4-173. (Figure 4-159) Network & Call >> Internet Setup (Figure 4-160) Selecting the Option for Static IPv6 AddPac Technology Proprietary & Documentation...
Page 158: (Figure 4-161) Entering Ipv6 Address Of '2001:E78:B01:17:115::10/64
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-161) Entering IPv6 address of ‘2001:e78:b01:17:115::10/64’ (Figure 4-162) Entering the Default router Address of ‘2001:e78:b01:17:1::1’ AddPac Technology Proprietary & Documentation...
Page 159: (Figure 4-163) Network & Call >> Internet Setup
AP-VP280 BcN Video Phone, Release 1.10 The following figures present the example of configuring the settings for VLAN. (Figure 4-163) Network & Call >> Internet Setup (Figure 4-164) Selecting the Option for VLAN Setup AddPac Technology Proprietary & Documentation...
Page 160: (Figure 4-165) Selecting The Option For Enabling Or Disabling Vlan
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-165) Selecting the Option for Enabling or Disabling VLAN (Figure 4-166) Entering VLAN ID “1000” AddPac Technology Proprietary & Documentation...
Page 161: (Figure 4-167) Pressing Ok And Then Moving To The Upper Menu
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-167) Pressing OK and then Moving to the Upper Menu AddPac Technology Proprietary & Documentation...
Page 162: Network & Call - Lan Setup
DHCP for Several PCs and bridge. ‘DHCP for 1PC shares the same IP address with the PC connected to the LAN1 with the AP-VP280. DHCP for Several PC has a function of router, which is used for connecting more 2 PCs.
Page 163: (Figure 4-169) Network & Call >> Lan Setup
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-169) Network & Call >> LAN Setup (Figure 4-170) Network Status Menu Details AddPac Technology Proprietary & Documentation...
Page 164: Network & Call - Network Status
AP-VP280 BcN Video Phone, Release 1.10 Network & Call - Network Status This menu displays 11 details of network status for protocols, Ethernet ports, IP, DNS, GK (H.323) and SIP Proxy Server at a glance. (Figure 4-171) Network Status Menu Section...
Page 165: (Figure 4-172) Network & Call >> Status
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-172) Network & Call >> Status (Figure 4-173) Network Status Menu Details AddPac Technology Proprietary & Documentation...
Page 166: Network & Call - Voip Setup
AP-VP280 BcN Video Phone, Release 1.10 Network & Call - VoIP Setup VoIP Setup menu is used for interoperating with SIP Server or gatekeeper or making adjustment of E.164 and QoS on SIP and H.323 basis. (Figure 4-174) VoIP Setup Menu Details...
Page 167: (Figure 4-175) Network & Call >> Voip Setup
AP-VP280 BcN Video Phone, Release 1.10 - Signaling Setup (Figure 4-175) Network & Call >> VoIP Setup (Figure 4-176) VoIP Setup Menu Details AddPac Technology Proprietary & Documentation...
Page 168: (Figure 4-177) Signaling Setup Menu Options
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-177) Signaling Setup Menu Options AddPac Technology Proprietary & Documentation...
Page 169: (Figure 4-178) Sip Protocol Menu Options
AP-VP280 BcN Video Phone, Release 1.10 The following figures show the setting details after you select SIP Protocol. (Figure 4-178) SIP Protocol Menu Options [Table 4-26] Description of SIP Protocol Menu Options Option Description User Name For registration to SIP server...
Page 170: (Figure 4-179) Entering Sip User Name
AP-VP280 BcN Video Phone, Release 1.10 The following figures present an example for entering the setting values for internetworking with SIP server: (Figure 4-179) Entering SIP User Name (Figure 4-180) Entering SIP User Password AddPac Technology Proprietary & Documentation...
Page 171: (Figure 4-181) Entering The Ip Address Of Sip Primary Server
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-181) Entering the IP address of SIP Primary Server (Figure 4-182) Entering the IP Address of SIP Secondary Server AddPac Technology Proprietary & Documentation...
Page 172: (Figure 4-183) Selecting The Option For Enabling Register E.164 Then Pressing F2 To Save
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-183) Selecting the Option for Enabling Register E.164 then Pressing F2 to save AddPac Technology Proprietary & Documentation...
Page 173: (Figure 4-184) H.323 Protocol Menu Details
AP-VP280 BcN Video Phone, Release 1.10 The following figure exhibits the screen after H.323 is selected. (Figure 4-184) H .323 Protocol Menu Details [Table 4-27] Description of H .323 Protocol Menu Details Item Description Enter H.323 ID for a gatekeeper registration H.323 ID...
Page 174: (Figure 4-185) Entering H.323 Id
AP-VP280 BcN Video Phone, Release 1.10 The following figures present the example for entering the settings to interwork with the gatekeepers: (Figure 4-185) Entering H.323 ID (Figure 4-186) Entering the Password for Registering the Gatekeeper AddPac Technology Proprietary & Documentation...
Page 175: (Figure 4-187) Entering The Ip Address Of The Primary Gatekeeper
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-187) Entering the IP address of the Primary Gatekeeper (Figure 4-188) Entering the IP Address of the Secondary Gatekeeper AddPac Technology Proprietary & Documentation...
Page 176: (Figure 4-189) Entering E.164 Phone Number
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-189) Entering E.164 phone number (Figure 4-190) Selecting the Option for Registering the Gatekeeper then Pressing F2 to Save AddPac Technology Proprietary & Documentation...
Page 177: (Figure 4-191) Qos Menu Options
AP-VP280 BcN Video Phone, Release 1.10 - QoS (Quality of Service) The AP-VP280 Video Phone transmits the video compression format of MPEG-4 or H.263 and the voice compression format of VoIP. A high video quality video stream such as MPEG-4 is affected very largely by a network status.
Page 178: (Figure 4-192) Menu >> Network & Call >> Voip Setup
AP-VP280 BcN Video Phone, Release 1.10 This QoS feature is applied to the WAN interface and does not apply to the LAN. The setting ranges from 48Kbps to 4Mbps. Enter the summation of the bandwidths for the video codec and voice packet.
Page 179: (Figure 4-194) Qos Menu Options
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-194) QoS Menu Options (Figure 4-195) Specifying QoS Bandwidth AddPac Technology Proprietary & Documentation...
Page 180: (Figure 4-196) Sip Menu Options
AP-VP280 BcN Video Phone, Release 1.10 - SIP Options This SIP Options correspond to the numerous supplementary features and options for SIP and H.323 protocols. These options are continually updated through APOS upgrade. (Figure 4-196) SIP Menu Options AddPac Technology Proprietary & Documentation...
Page 181: [Table 4-29] Description Of Sip Menu Options
Assigns SIP UA retry count to the transmission count of SIP INVITE If the trying message for the INVITE does not come in a specified time due to a network failure, the AP-VP280 sends the next INVITE message. 10 is set at default and the general setting is 3.
Page 182: (Figure 4-197) Pstn Prefix Menu Option
AP-VP280 BcN Video Phone, Release 1.10 - PSTN Prefix This option specifies a set of numbers for accessing FXO (a call try through PSTN) and not used for a call accessing VoIP network. This option is useful for transferring a call to PSTN when VoIP communication in abnormal state caused by some exceptional cases, such as a network failure, the call can not be delivered.
Page 183: Network & Call - Additional Service
AP-VP280 BcN Video Phone, Release 1.10 Network & Call - Additional Service Additional Service menu includes the configuration settings of Call Forward, DoNotDisturb, Call Wait Setup, Auto Response, H323 Conference Option and Call Option. (Figure 4-198) Additional Service Menu Options...
Page 184: (Figure 4-199) Network >> Add. Service
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-199) Network >> Add. Service (Figure 4-200) Selecting Additional Menu Section AddPac Technology Proprietary & Documentation...
Page 185: (Figure 4-201) Call Forward Menu Section
AP-VP280 BcN Video Phone, Release 1.10 - Call Forward Call Forward menu configures the settings for forwarding an inbound call to the other number or voice mail when the phone user is busy on the line or not able to answer a call or need to forward a call unconditionally.
Page 186: [Table 4-31] Description Of Call Forward Menu Options
AP-VP280 BcN Video Phone, Release 1.10 [Table 4-31] Description of Call Forward Menu Options Menu Option Description Unconditional Enter a phone number to which all calls to be forwarded Unconditional Setup Select an option for enabling or disabling unconditional call forwarding...
Page 187: (Figure 4-203) Additional Service Menu Details
AP-VP280 BcN Video Phone, Release 1.10 - DND (DoNotDisturb) This feature prevents calls from ringing on an extension (Ring Silence) or activates Call Reject (rejects an incoming call which is placed on Ring Silence) which can be enabled if Absence button pressed for more than 2 seconds DoNotDisturb (DND) is enabled (if it is already enabled, it becomes disabled afterwards).
Page 188: [Table 4-32] Description Of Dnd Menu Options
AP-VP280 BcN Video Phone, Release 1.10 [Table 4-32] Description of DND Menu Options Option Description Call Reject Rejects the calls sent from a calling party Ring Silence Prevents the calls from ringing which is sent from a calling party AddPac Technology Proprietary & Documentation...
Page 189: (Figure 4-205) Additional Service Menu Details
AP-VP280 BcN Video Phone, Release 1.10 - Call Wait Setup This feature alerts the phone user to incoming call while the phone user is on another call. Call Waiting provides an audio alert and displays incoming information (visual alert) on the phone screen.
Page 190: [Table 4-33] Description Of Call Wait Setup Menu Options
AP-VP280 BcN Video Phone, Release 1.10 [Table 4-33] Description of Call Wait Setup Menu Options Option Description Disables Call Waiting Call Wait Off Call Wait On Enables Call Waiting AddPac Technology Proprietary & Documentation...
Page 191: (Figure 4-207) Additional Service Menu Details
AP-VP280 BcN Video Phone, Release 1.10 - Auto Response Automatic Response menu answers an incoming call automatically, so the phone user does not have to take the call directly. The user may set the time interval to answer the call automatically by 3 seconds, 5 seconds, 10 seconds and 15 seconds.
Page 192: [Table 4-34] Description Of Auto Response Menu Options
AP-VP280 BcN Video Phone, Release 1.10 [Table 4-34] Description of Auto Response Menu Options Menu Option Description Direct Response Connects incoming calls automatically after one ring After 3 sec. Connects incoming calls automatically after 3 seconds After 5 sec. Connects incoming calls automatically after 5 seconds...
Page 193: (Figure 4-209) Additional Service Menu Details
AP-VP280 BcN Video Phone, Release 1.10 - H323 Conference Option This menu configures the settings for H.323 conference options. The name or indicator mode of H.323 conference to be displayed on the phone screen can be configured. (Figure 4-209) Additional Service Menu Details (Figure 4-210) H.323 Conference Option Menu Components...
Page 194: (Figure 4-211) H.323 Confer Name Manu Option
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-211) H.323 Confer Name Manu Option (Figure 4-212) H.323 Indicator Display Indicator Menu Componenet AddPac Technology Proprietary & Documentation...
Page 195: (Figure 4-213)H.323 Display Indicator Menu Options
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-213)H.323 Display Indicator Menu Options [Table 4-35] Description of H.323 Display Indicator Menu Options Option Description Disables the indicator mode on the screen during conference Indicator Off Enables the indicator mode on the screen during conference...
Page 196: Network & Call - Multi Phone Number
AP-VP280 BcN Video Phone, Release 1.10 Network & Call - Multi Phone Number If your phone is assigned with more than one number, this menu determines which number is to be assigned to outbound calls. The Phone can take inbound calls with many different numbers, but outbound calls can take only the selected number at default.
Page 197: (Figure 4-215) Menu >> Network >> Multi Number
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-215) Menu >> Network >> Multi Number (Figure 4-216) Multi Phone Number Menu Option AddPac Technology Proprietary & Documentation...
Page 198: Network & Call - Service Port Setup
21, HTTP which is set to the port number of 80 and TFTP which is set the port number of 69 at default. The AP-VP280 can perform the role of SNMP Agent. By using SNMP of the remote device, you can access the AP-VP280 and use its SNMP (default: 161).
Page 199: (Figure 4-218) Menu >> Network & Call >> Service
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-218) Menu >> Network & Call >> Service (Figure 4-219) Service Port Setup Menu Details AddPac Technology Proprietary & Documentation...
Page 200: Network & Call - Auto Upgrade
AP-VP280 BcN Video Phone, Release 1.10 Network & Call - Auto Upgrade If a new feature of the AP-VP280 is added, then the software (firmware) needs to be upgraded. One way of upgrading the software is using FTP manually. Another way is to configure the...
Page 201: [Table 4-37] Description For Composition Of Auto Upgrade Menu Details
AP-VP280 BcN Video Phone, Release 1.10 [Table 4-37] Description for Composition of Auto Upgrade Menu Details Menu Details Description Enter the URL of Auto Upgrade Server Example: down.addpac.com/apos/VP280/packing.lst Login Name Enter the authentication ID for accessing Auto Upgrade Server Example: addpac...
Page 202: (Figure 4-221) Menu >> Network >> Auto Upgrade
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-221) Menu >> Network >> Auto Upgrade (Figure 4-222) Auto Upgrade Menu AddPac Technology Proprietary & Documentation...
Page 203: Network & Call - Sscp Setup
Smart Service Control Protocol (SSCP) is the AddPac proprietary protocol operates between the IP Next PBX and IP terminals. SSCP enables the AddPac IP terminal to take the soft key for each of its status from the IPNext PBX and receive a wide rage of services from the IPNext PBX. The call features supported by SSCP are Redial, GroupPark, GroupPickup, NewCall, CCBS, Park, Pickup, Transfer, Hold, Add-Party, Conference and more.
Page 204: (Figure 4-224) Menu >> Networkl >> Sscp Setup
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-224) Menu >> Networkl >> SSCP Setup (Figure 4-225) SSCP Setup Menu Details AddPac Technology Proprietary & Documentation...
Page 205: Network & Call - Presence Setup
Unified Message Service (Voice Mail, Short Message), Call Control and Forward Setup. Smart Messenger operates, in the basis of Smart Service Control Protocol (SSCP), which is the AddPac proprietary protocol, between the AddPac IP-PBX and IP terminals.
Page 206: (Figure 4-227) Menu >> Network >> Presence
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-227) Menu >> Network >> Presence (Figure 4-228) Presence Setup Menu Details AddPac Technology Proprietary & Documentation...
Page 207: (Figure 4-229) Presence Server Menu Options
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-229) Presence Server Menu Options (Figure 4-230) Start Menu Options AddPac Technology Proprietary & Documentation...
Page 208: Applications Menu
AP-VP280 BcN Video Phone, Release 1.10 Applications Menu Applications menu is composed of VoD Browser, File Browser, Short Message Service (SMS), Conferencing, Digital Video Recorder (DVR), Voice Mail and Remote Broadcasting Communication. More diversified features of this menu can be supported through the software updates.
Page 209 AP-VP280 BcN Video Phone, Release 1.10 Configures the settings of VoD Browser, DVR, Document Sharing, Remote Broadcasting Communication and other application programs. Sends, receives and manages a short text form of messages Shows a list of the conference calls which are available for connection at the present. Press the Call button to participate in the conference.
Page 210: Applications - Vod Browser
VoD Browser – VoD Browser can be used only if the phone interworks with the AddPac VoD Server (such as AP- VD1000). You can check the information of video supported by the VoD server. (Figure 4-232) VoD Browser Menu Section in the Main Menu Layout (Figure 4-233) Connecting VoD Server AddPac Technology Proprietary &...
Page 211: (Figure 4-234) Screen Layout Of File Browser Menu Section
AP-VP280 BcN Video Phone, Release 1.10 Applications – File Browser This menu displays the file information in the USB device which is connected to the USB connector of the AP-VP280. (Figure 4-234) Screen Layout of File Browser Menu Section AddPac Technology Proprietary & Documentation...
Page 212: (Figure 4-235) Select Menu >> Applications >> File Browser
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-235) Select Menu >> Applications >> File Browser (Figure 4-236) Screen Layout of File Browser in Access AddPac Technology Proprietary & Documentation...
Page 213: Applications Application Settings
AP-VP280 BcN Video Phone, Release 1.10 Applications Application settings This menu configures the settings for the VoD Browser server address, Document Share port, Window Size, DVR Setup, Remote Broadcast and Chime Setup. (Figure 4-237) Screen Layout of Application Settings Menu Section...
Page 214: (Figure 4-238) Menu >> Applications >> App. Setup
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-238) Menu >> Applications >> App. Setup (Figure 4-239) Application Settings Menu Options AddPac Technology Proprietary & Documentation...
Page 215: (Figure 4-240) Menu >> Applications >> App. Setup >> Vod Browser
AP-VP280 BcN Video Phone, Release 1.10 - VoD Browser This menu detail specifies the address of VoD sever. (Figure 4-240) Menu >> Applications >> App. Setup >> VoD Browser (Figure 4-241) Specifying the Address of VoD Server AddPac Technology Proprietary & Documentation...
Page 216: (Figure 4-242) Menu >> Applications >> Application Settings >> Document Share
AP-VP280 BcN Video Phone, Release 1.10 - Document Share Sets the port for Document Share and Window Size (Figure 4-242) Menu >> Applications >> Application Settings >> Document Share (Figure 4-243) Document Share Menu Options AddPac Technology Proprietary & Documentation...
Page 217: (Figure 4-244) Menu >> Applications >> App. Setup >> Dvr Setup
AP-VP280 BcN Video Phone, Release 1.10 - DVR Setup Configures the settings for the DVR server address, port, ID and password. (Figure 4-244) Menu >> Applications >> App. Setup >> DVR Setup (Figure 4-245) DVR Setup Options AddPac Technology Proprietary & Documentation...
Page 218: (Figure 4-246) Menu >> Applications >> App. Setup >> Remote Broadcast
AP-VP280 BcN Video Phone, Release 1.10 - Remote Broadcast Configures the settings of the server Address, Port, ID and Password for remote broadcast. (Figure 4-246) Menu >> Applications >> App. Setup >> Remote Broadcast (Figure 4-247) Remote Broadcast Menu Options...
Page 219: (Figure 4-248) Menu >> Applications >> App. Setup >> Chime Setup
AP-VP280 BcN Video Phone, Release 1.10 Chime Bell Setup Sets the option for enabling or disabling the chime bell used for the remote broadcast. (Figure 4-248) Menu >> Applications >> App. Setup >> Chime Setup (Figure 4-249) Chime Setup Menu Option...
Page 220: Applications - Message
Message – You can use this feature only if the AP-VP280 interworks with the AddPac IPNext PBX through Smart Service Control Protocol (SSCP), You can send and check a short form of text message between the AddPac IP terminals using SSCP. You can send a message up to 9 receivers simultaneously and when you receive a message on the phone and you can be notified by a displayed note window.
Page 221: (Figure 4-251) Menu >> Applications >> Sms
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-251) Menu >> Applications >> SMS (Figure 4-252) Message Menu Details AddPac Technology Proprietary & Documentation...
Page 222: (Figure 4-253) Write Text Message Menu Component
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-253) Write Text Message Menu Component (Figure 4-254) Sending a Message AddPac Technology Proprietary & Documentation...
Page 223: Applications Conference Room
AP-VP280 BcN Video Phone, Release 1.10 Applications Conference Room This menu displays a list of conference rooms which is available at the present and you ma press the Call button to participate in on of the available conference rooms. The available methods of conference are Ad Hoc, Dial-Out, Ad Hoc Dial-Out and Meet-Me and the user rank can be categorized as Ad Hoc, Dial-Out, Ad Hoc Dial-Out and Meet-Me.
Page 224: (Figure 4-256) Menu >> Applications >> Conference Room
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-256) Menu >> Applications >> Conference Room (Figure 4-257) List of Available Conference Rooms for Placing a Conference Call AddPac Technology Proprietary & Documentation...
Page 225: (Figure 4-258) Making A Conference Call
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-258) Making a Conference Call AddPac Technology Proprietary & Documentation...
Page 226: Applications - Dvr List Browser
DVR List Browser – DVR List Browser menu section can used only if the AP-VP280 interworks with the AddPac DVR Server (such as AP-VD1000), you can see all the video and voice information details of the camera in remote location, which are gathered by the DVR server in real time basis. In addition to the camera information details, you can configure the settings for Pan/Tilt/Zoom.
Page 227: (Figure 4-260) Menu >> Applications>> Dvr Live
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-260) Menu >> Applications>> DVR Live (Figure 4-261) DVR Camera Image Menu AddPac Technology Proprietary & Documentation...
Page 228: (Figure 4-262) Example For Displaying The Video Image Sent From Dvr Camera In Remote
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-262) Example for Displaying the Video Image Sent from DVR Camera in Remote Location [Table 4-42] Description of Softkey Features for Operating the DVR Camera Softkey Description Verifies the media information details of the video image transmitted from the...
Page 229: (Figure 4-263) Media Information Details Of The Dvr Camera Producing The Video Images
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-263) Media Information Details of the DVR Camera Producing the Video Images (Figure 4-264) Audio Output Options of the DVR Camera Producing the Video Images AddPac Technology Proprietary & Documentation...
Page 230: (Figure 4-265) Camera Control Menu Options
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-265) Camera Control Menu Options AddPac Technology Proprietary & Documentation...
Page 231: Applications - Dvr Archive Browser
DVR Archive Browser – DVR Archive menu can be used only if the AP-VP280 interworks with the AddPac DVR Server. The menu verifies the video and voice information details of the camera which have been collected and saved in the DVR Server.
Page 232: (Figure 4-267) Menu >> Applications>> Dvr Archive
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-267) Menu >> Applications>> DVR Archive (Figure 4-268) DVR Archive Browser Menu Details AddPac Technology Proprietary & Documentation...
Page 233: (Figure 4-269) Dvr Archive Menu Options
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-269) DVR Archive Menu Options [Table 4-43] Softkey Options for Media Player of DVR Archive Option Description Plays the video saved in the DVR server Pauses playing the video Moves the video being played backward by 10 seconds Moves the video being played forward by 10 seconds AddPac Technology Proprietary &...
Page 234: Applications - Rbc
Applications – You can use this Remote Broadcasting Controller (RBC) only if your AP-VP280 interworks with the AddPac Broadcasting Server. This menu allows the AP-VP280 to provide remote broadcasting to other AddPac IP terminals which are registered to the broadcasting server. These terminals can be formed as a group and the VP280 takes the input of voice/ video and broadcasts to the group.
Page 235: (Figure 4-271) Menu >> Applications >> Rbc
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-271) Menu >> Applications >> RBC (Figure 4-272) Screen Layout of RBC Menu Options AddPac Technology Proprietary & Documentation...
Page 236: (Figure 4-273) Selecting The Groups For Rbc
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-273) Selecting the Groups for RBC (Figure 4-274) RBC Menu Options AddPac Technology Proprietary & Documentation...
Page 237: Applications - Voice Mail
Voice Mail – This menu displays received and saved voice messages and plays the messages to be listened. Use the user password registered to the AddPac IPNext PBX to listen to the messages. (Figure 4-275) Voice Mail Menu Details [Table 4-44] Description of Voice Mail Menu Details...
Page 238: (Figure 4-276) Menu >> Applications>> Voice Mail
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-276) Menu >> Applications>> Voice Mail (Figure 4-277) Voice Mail Menu Options AddPac Technology Proprietary & Documentation...
Page 239: Remote Setup Menu
Remote Setup Menu Remote Setup menu adjusts the settings for the other party’s Bandwidth, Frame Rate and Reject Remote. This menu can be used only between the AddPac IP terminals. (Figure 4-278) Remote Setup Menu Category in Main Menu Layout...
Page 240: [Table 4-45]Composition Of Remote Setup Menu Sections
Sets the bandwidth of the other party’s AddPac IP terminal remotely, ranging from 128Kbps to 4160Kbps. Sets the resolutions and frame rate of the other party’s Addpac IP terminal remotely. Not allowing the other party to change the settings, by using one’s AddPac IP terminal, for the bandwidth and screen size of my AP-VP280 remotely.
Page 241: Remote Setup - Bandwidth Remote
AP-VP280 BcN Video Phone, Release 1.10 Remote Setup Bandwidth Remote – (Figure 4-279) Bandwidth Remote Menu Details AddPac Technology Proprietary & Documentation...
Page 242: (Figure 4-280) Remote Setup >>Bandwidth
AP-VP280 BcN Video Phone, Release 1.10 The following figures present the example for selecting a video bandwidth. (Figure 4-280) Remote Setup >>Bandwidth (Figure 4-281) Selecting a Bandwidth Range AddPac Technology Proprietary & Documentation...
Page 243: (Figure 4-282) Selecting A Specific Bandwidth
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-282) Selecting a Specific Bandwidth AddPac Technology Proprietary & Documentation...
Page 244: Remote Setup - Vcodec Remote
VCodec Remote – This menu determines the Image Size and Frame Rate to be used by the other party’s AddPac Video IP Phone. QVGA, HalfVGA and VGA are the available Image Size for MPEG-4 and QCIF, QVGA, CIF, HVGA, VGA are available for H.263. H.264 supports the Image Size of QVGA.
Page 245: (Figure 4-284) Remote Setup >> Video Codec
AP-VP280 BcN Video Phone, Release 1.10 The following figure presents the example for selecting video codec of the other party’s the AddPac Video Phone. (Figure 4-284) Remote Setup >> Video Codec (Figure 4-285) Selecting QVGA AddPac Technology Proprietary & Documentation...
Page 246: (Figure 4-286) Specifying The Frame Rate
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-286) Specifying the Frame Rate AddPac Technology Proprietary & Documentation...
Page 247: Remote Control Setup Remote Controls Permit/ Reject
AP-VP280 BcN Video Phone, Release 1.10 Remote Control Setup Remote Controls Permit/ Reject – This menu allows you to permit or reject the other party to access your VP280 remotely and adjust the image size, frame rate and bandwidth. Remote Controls Permit is set at default.
Page 248: (Figure 4-288) Remote Setup >> Reject Remote
AP-VP280 BcN Video Phone, Release 1.10 (Figure 4-288) Remote Setup >> Reject Remote (Figure 4-289) Permission Menu Options AddPac Technology Proprietary & Documentation...
Page 249: Chapter 5. Console Commands
AP-VP280 BcN Video Phone, Release 1.10 Chapter 5. Console Commands Basic Commands for Configuring Network Settings * Commands for Verifying the Configured Settings VideoPhone# show running-config Building configuration... Current configuration: version 8.47.024 hostname VideoPhone username root password router administrator interface Loopback0 ip address 127.0.0.1 255.0.0.0...
Page 250 AP-VP280 BcN Video Phone, Release 1.10 * Configuring IP, Default Route Settings VideoPhone# configure terminal VideoPhone(config)# interface fastethernet 0/0 → Fast Ethernet Interface Port 0 VideoPhone(config-if)# ip address 172.17.201.232 255.255.0.0 → IP Address Setting VOIP_INTERFACE_DOWN VOIP_INTERFACE_UP : (172.17.201.232) VideoPhone(config-if)# exit →...
Page 251: Video Mode Command List
AP-VP280 BcN Video Phone, Release 1.10 Video Mode Command List The basic video/audio configuration settings of your AP-VP280 can be changed by using the menu options of OSD. You can also change the setting by using Telnet depending on circumstance.
Page 252: Selecting External Audio Input Port Mode
AP-VP280 BcN Video Phone, Release 1.10 Selecting External Audio Input Port Mode This command allows you to select line input or microphone input as mode of the external audio input port (Default: Microphone). => Enter ? to display a list of commands.
Page 253: Selecting External Audio Output Port Mode
AP-VP280 BcN Video Phone, Release 1.10 Selecting External Audio Output Port Mode This command allows you to change mode of the external audio output port on CLI (Default: headphone). VideoPhone(config-video0/0)# VideoPhone(config-video0/0)# audio-out ? line Line output head Headphone output VideoPhone(config-video0/0)# audio-out head...
Page 254: Adjusting Video Input Saturation
AP-VP280 BcN Video Phone, Release 1.10 VideoPhone(config-video0/0)# VideoPhone(config-video0/0)# video-in-contrast ? Contrast [0 - 127] VideoPhone(config-video0/0)# video-in-contrast 64 VideoPhone(config-video0/0)# Adjusting Video Input Saturation This command allows you to adjust the saturation of the internal camera and composite input port (Default: 68).
Page 255: Adjusting Vertical Video Input Offset Value
AP-VP280 BcN Video Phone, Release 1.10 Adjusting Vertical Video Input Offset Value This command allows you to adjust the vertical offset of the internal camera and composite input port. This command is used to connect the external video devices of the DVD player, if required (Default: 19).
Page 256: Chapter 6. Appendix
AP-VP280 BcN Video Phone, Release 1.10 Chapter 6. Appendix This Appendix describes the pin specification of the cables used for AP-VP280. • Console port signal and pin-out (RJ-45 to DB9) • Pin-out of the UTP cable (RJ-45 to RJ-45) Console Port Signal and Pin-Out The built-in RJ-45 to DB9 (female DTE connector) cable is used to connect the console port of this product to the PC where the terminal emulator software operates.
Page 257: (Figure 6-1) 100Base-Tx Rj-45 Connector
Rx + ← Rx - ← • This specification is about the serial cable that connects AP-VP280 to the hub. • Use a cross cable to connect AP-VP280 to either another AP-VP280 or a PC. AddPac Technology Proprietary & Documentation...
Page 258: Abbreviation And Glossary
Stands for VoIP Plug & Play Management Software. This integrated management software developed by AddPac Technology enables VoIP products to be installed in a AP-VPMS GUI environment, be monitored in real-time, or to be upgraded. This software also enables network administration.
Page 259 AP-VP280 BcN Video Phone, Release 1.10 This is a standard connector used to connect IEEE 802.3 10Base-2 coaxial cables to BNC Connector Media Access Unit (MAU). This is a chip installed into a printed circuit board used to send executable boot Boot Loader commands to a network device.
Page 260 AP-VP280 BcN Video Phone, Release 1.10 signals to digital bit streams and vice versa based on a pulse code modulation method; 2. A DSP software algorithm that compresses or decompresses voice or audio signals over Voice over IP, Voice over Frame Relay, or Voice over ATM.
Page 261 AP-VP280 BcN Video Phone, Release 1.10 Abbreviation of Facsimile. FAX refers to the transmission of scanned texts or images to a printer or an output device connected to another phone number by using a telephone line. Once the original document is read by a facsimile, the facsimile treats the document as a fixed graphic image, and converts it to bitmap.
Page 262 AP-VP280 BcN Video Phone, Release 1.10 or 16Kbps. If the PBX network is configured to support ADPCM, you can exchange ADPCM encoding voice with packet voice networks, PSTN, or PBX networks. This standard is specified under the ITU-T standard of G-series recommendation.
Page 263 AP-VP280 BcN Video Phone, Release 1.10 server to transfer files such as text files and graphic files. Stands for Internet Protocol Security protocol. IPSec is a still developing standard for the security of networks or the packet processing layer of network communications. In the previous security techniques, security has been included in the application layers of a communication model.
Page 264 AP-VP280 BcN Video Phone, Release 1.10 workstations, peripherals, terminals, and other devices in a building or a geographically limited area. The LAN standard specifies a cable connection and signal processing method in the physical layer and data link layer of the OSI model. Reference: MAN, WAN.
Page 265 AP-VP280 BcN Video Phone, Release 1.10 A packet is a group of logical data that contains user data and a header where control Packet data is contained. A packet mainly refers to the unit of network layer data. Stands for Private Branch eXchange. PBX, which is located in a subscriber building, is a digital or analog phone switchboard used to connect private networks to public phone networks.
Page 266 Internet. SIP is independent to lower-level packet protocols (e.g. TCP, UDP, ATM, and X.25). This is software that allows you to monitor AP-GK1000, AP-GK2000, and AP-GK3000, SmartViewer which are the gatekeeper series of AddPac Technology, in a Graphical User Environment AddPac Technology Proprietary & Documentation...
Page 267 AP-VP280 BcN Video Phone, Release 1.10 (GUI) environment in real-time and to search or manage statistical data. Stands for Simple Network Management Protocol. This is a network management protocol almost dedicated to TCP/IP networks. SNMP monitors and controls network SNMP devices, and manages setup, collection of statistical data, operation performance, and security features.
Page 268 AP-VP280 BcN Video Phone, Release 1.10 segments by using the FRF.12 encapsulation technique to pass the frame relay network. Stands for Voice over HDLC. Voice over HDLC enables a router to deliver live voice VoHDLC traffic (e.g. phone calling and facsimile) to another router through a serial line.
Page 269 AP-VP280 BcN Video Phone, Release 1.10 AddPac Technology Co., Ltd. Floors # 2 and 3, Jeong Am Bldg., 769-12, Yoksam-dong, Kangnam-ku, Seoul Phone (02) 568-3848 (Rep.) Facsimile (02) 568-3847 E-mail Address: info@addpac.com http://www.addpac.com AddPac Technology Proprietary & Documentation...

AddPac AP-VP280 Installation And Operation Manual

Chapter 1. Product Overview

Chapter 2. Preparing for Installation

Chapter 3. Installing

Chapter 4. Configuring OAD

Quick Links

Need help?

Questions and answers

Related Manuals for AddPac AP-VP280

Summary of Contents for AddPac AP-VP280