Snmp; Table 3-50 Snmp Configuration - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide

snmp

Enable snmp server and assign snmp community with a setting to monitor a device in a remote
location by using SNMP.
The following example configures snmp community setting to 'public',
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# ip snmp server
3
IP-PBX(config)# snmp port 161
4
IP-PBX(config)# snmp community public
ro 0.0.0.0
5
IP-PBX(config)#
version v2c AddPac
Table 3-49 snmp Configuration
Command
snmp host 10.1.1.1
AddPac Technology Proprietary & Documentation
Description
Enter APOS configuration mode
Enable logging
(Default: Disable)
(optional) Change the default snmp port number
to161
Set the value of snmp community to public
Transmit Trap to SNMP Manager at 10.1.1.1, as String
AddPac by SNMP v2c protocol
132 - 72