IPNext 190 System Installation Guide
call-manager sscp store-event
call-manager sscp store-event configuration settings are used to set the interval of notification message between
call-manager and presence server.
For changing the user status information, the notification message is sent to the presence server from the call
manager first, the presence server is used to deliver the changed information to PSClient and the Messenger
registered to itself.
The notification message is sent if one of the conditions of sscp store-event count / time is matched.
If store-event-count is set to 1 in the environment where the registered user to the IPNext PBX changes one's
status very often, the notification message is sent whenever each user status is changed. So the IPNext PBX may
take a heavy load as a result. Therefore, the administrator needs to configure the settings suitable to the
environment settings accordingly.
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# call-manager sscp store-event
count
time
3
IP-PBX(config)# call-manager sscp store-event-
count 1
4
IP-PBX(config)# call-manager sscp store-event-
time 1
Table 3-55 call-manager sscp store-event Settings
Command
set
store
value
set
store
event
value
AddPac Technology Proprietary & Documentation
Enter APOS command entry mode
Configure the settings of call-manager
sscp store-event
Create notification depending on the
event
count
number of changes in the user status
Create notification in a certain time
timeout
interval
Create notification message when a
change takes place in the user status
once.
(Default: count 10)
Notification is created every second.
(Default: time 3)
Description
132 - 77
Need help?
Do you have a question about the IPNext190 and is the answer not in the manual?