IPNext 190 System Installation Guide
dns
Domain Name Server (DNS) is used from Internet to change the name of network node to IP address. For
specifying to DNS server, 5 addresses can be entered at maximum. Even if more than 5 addresses are entered,
only 5 addresses can be applied.
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# dns name-server ?
A.B.C.D
X:X::X:X
3
IP-PBX(config)# dns name-server 172.17.10.10
Step
1
IP-PBX# show run
Building configuration...
Current configuration:
version 8.47.024
hostname IP-PBX
!
dns name-server 172.17.10.10
!
Table 3-37 Configuring DNS
Command
Domain server IP address
Domain
server
address
Table 3-38 Verifying DNS Settings
Command
AddPac Technology Proprietary & Documentation
Description
Enter APOS command entry mode
Specify the address of Domain Name
Server
(Default: Disable)
Specify the server to IPv4 address
Specify the server to IPv6 address
IPv6
.
Enable DNS in IPv4 / IPv6 format,
Priority level is determined by entry
order.
Description
Use show run command to verify DNS
configuration settings
132 - 64
Need help?
Do you have a question about the IPNext190 and is the answer not in the manual?