Step2. Configure The Interface; Step3. Configure Default Route; Table 4-1 Configure The Interface; Table 4-2 Configuring Default Route - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide

Step2. Configure the interface

This example specifies the interface of Fastethernet 0/0 to the IP address of '172.17.111.20'.
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# interface fastethernet 0/0
3
IP-PBX(config)#
255.255.0.0

Step3. Configure Default Route

This example specifies the Default Router to the IP address of 172.17.1.1.
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)#
172.17.1.1
Table 4-2 Configuring the interface
Command
ip address 172.17.111.20
Table 4-3 Configuring Default Route
Command
ip route 0.0.0.0
AddPac Technology Proprietary & Documentation
Enter the APOS command mode
Enter the interface configuration mode
Specify the interface to the IP address
of 172.17.111.20
Description
Enter the APOS command mode
default route를 "172.17.1.1"로 설정
0.0.0.0
Description
132 - 108