Page 1
AP-VP150 Video Phone [Installation and Operation Manual] March 2006 Technical Sales Division AddPac Technology Co., Ltd. www.addpac.com...
Page 2
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 AP-VP150 Video Phone Note The specification and information in this document are subject to change without notice. All statements, information, and recommendations in this document are believed to be accurate but are presented without warranty of any kind, express or implied.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [ Table of Contents ] Introduction ......................... 14 Chapter 1. Introduction to AP-VP150 .... 16 AP-VP150 Overview ......................16 ......... 19 Hardware Specification of AP-VP150 Software Features of AP-VP150..................20 Front Panel of AP-VP150 ....................22 Rear Panel of AP-VP150 .....................
Page 4
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Using Input Mode........................ 45 Phone Book Menus......................48 Phone Book – Search By Name..................50 Phone Book – Search By Number..................56 Phone Book – Register....................... 62 Phone Book – Recent Call ....................70 Phone Book –...
Page 5
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Chapter 5. Console Commands…...182 Basic Commands for Network Setup................182 List of Video Mode Commands ..................184 Adjusting Gain Value of External Audio Input Port ............185 Amplifying Microphone of External Audio Input Port ........... 185 Selecting External Audio Output Port Mode ..............
Page 6
(Figure 3-1) Connection of WAN Interface to AP-VP150 ..........32 (Figure 3-2) Connection of LAN Interface to AP-VP150............ 33 (Figure 3-3) Connection of PSTN Cable Interface to AP-VP150 ........34 (Figure 3-4) Connection of Audio Input Interface to AP-VP150 ........35 (Figure 3-5) Connection of Audio Output Interface to AP-VP150..........
Page 7
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-32) Register Screen ....................62 (Figure 3-33) Entering New Phone Number in Register Screen........63 (Figure 3-34) Selecting Menu >> Phone Book..............64 (Figure 3-35) Selecting Phone Book >> Register..............64 (Figure 3-36) Register.......................
Page 8
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-68) Power Save Screen ..................90 (Figure 3-69) Power Save Screen ..................91 (Figure 3-70) AV Setup Screen....................92 (Figure 3-71) Volume Screen ....................94 (Figure 3-72) Selecting Menu >> AV Setup ................. 95 (Figure 3-73) Selecting AV Setup >>...
Page 9
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-106) Video Bandwidth Setting Screen............... 117 (Figure 3-107) Video Bandwidth Setting Screen............... 117 (Figure 3-108) Selecting Menu >> AV Setup ..............119 (Figure 3-109) Selecting AV Setup >> Video Codec ............119 (Figure 3-110) Setting Bandwidth to 4096 Kbps ..............
Page 10
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-143) LAN Setup Screen..................141 (Figure 3-144_1) VoIP Setup Screen..................142 (Figure 3-145_2) Signalling Setup Screen ................143 (Figure 3-146) SIP Protocol Screen ..................143 (Figure 3-147) Entering User Name ..................145 (Figure 3-148) Entering Password ..................
Page 11
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 4-12) Switching to Local View Using the Layout Button........176 (Figure 4-13) Enabled in the Remote View and Local View .......... 177 (Figure 4-14) Using PIP With the OK Button ................ 178 (Figure 4-15) Remote Camera Pan/Tilt ................
Page 12
[Table 2-1] Revision History ..................... 15 [Table 2-2] Hardware Specification of AP-VP150............... 19 [Table 2-3] Software Features of AP-VP150................. 20 [Table 2-4] LED on the Front Panel of AP-VP150..............23 [Table 2-5] Rear Panel of AP-VP150..................25 [Table 2-1] Peripherals of AP-VP150..................28 [Table 2-2] Name and Feature of Remote Control ............
Page 13
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [Table 4-3] PTZ Commands ....................179 [Table 6-1] List of Video Mode Commands ..............184 [Table 7-1] Console Port Pin-Out ..................190 [Table 7-2] Signals and Pin-Out of Serial Ethernet Cable..........191 205 - 13 AddPac Technology Proprietary &...
Operation Manual. [ Document Organization ] The purpose of this document is to help AP-VP150 users install AP-VP150 easily. This document consists of seven chapters. If you have used a video phone before, refer to helpful chapters. If you are not familiar with a video phone or have not installed it before, read this document carefully before handling AP- VP150.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 If you have any questions regarding AP-VP150 or your product has any failures, please contact AddPac Technology Co., Ltd. AddPac Technology Co., Ltd. Floor Nos. 2/3/5, Jeong Am Bldg., 769-12, Yoksam-dong, Kangnam-ku, Seoul Phone (02) 568-3848 (Rep.)
VP150 Introduction AP-VP150 is an IP video phone that allows you to make high quality voice communications by using the Internet. This product supports a video conference call, video calling, and aid to communication access for the disabled optimally through the latest audio/video codecs and a variety of AV I/O interfaces.
Page 17
Caller ID (CID), and call transfer to a remote site. The advantage of AP-VP150 is to support the unique supplementary services of AddPac. The broadcasting function is the main supplementary service of AddPac.
The performance and reliability of AddPac VoIP gateway series, ATM routers, and WAN routers have been recognized in global markets as well as the Korean market. AP-VP150, which is a collection of experiences and know-how accumulated in the enterprise and service provider markets, would be a solution that meets the needs of customers that ask for next-generation communications.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Hardware Specification of AP-VP150 [Table 2-2] Hardware Specification of AP-VP150 Category Specification Model Name AP-VP150 Product Category IP video phone (Speaker phone installed) Microprocessor High quality RISC microprocessor Digit and key button...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Software Features of AP-VP150 [Table 2-3] Software Features of AP-VP150 High quality IP video phone supporting IP telephony based on multimedia Supports a standardized network protocol for audio/video, VoIP, and LAN services Various I/O interfaces provided by default such as Multi-port 10/100M Fast Ethernet, composite (RCA) video input/output, S-Video output, 3.5mm stereo audio input/output, and RS-232C...
Page 21
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Supports AddPac EMS solution inter-working for network administration and maintenance. AP-VPMS VoIP EMS AP-MBMS video broadcasting EMS Easy use through On-Screen Display (OSD) software that inter-works using a remote control Supports both IPv4 and IPv6 for next-generation IP inter-networking inter-working (dual stack).
The rear panel consists of a variety of audio and video interfaces including the WAN/LAN interfaces. (Figure 2-2) Front Panel of AP-VP150 The LED on the front panel of AP-VP150 is described in the table below: 205 - 22 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [Table 2-4] LED on the Front Panel of AP-VP150 Button Name Feature SpeedDial Makes a call to the speed dial menus. F1~F4 These are function keys allocated to the bottom of the LCD screen to allow you to use the menus of Phone Book and Speed Dial.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Rear Panel of AP-VP150 The rear panel of AP-VP150 consists of two 10/100Mbps Fast Ethernet interfaces for WAN/LAN access, the PSTN port for accommodating a regular C.O.line, video I/O port and audio I/O port, which connect to video and acoustic devices, as well as the RS-232C port, which allows you to access the console for device management and camera control.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 The rear panel of AP-VP150 is described in [Table 1-4]: [Table 2-5] Rear Panel of AP-VP150 Display Description This switch supplies the power to the system or blocks power supply. DC 5V 5A This port is used to connect an adapter for DC 5V 5A.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Preparatory Information on AP-VP150 Installation Recommendations for Installation Recommendations for the safe use of this product are as follows: • Install and use this product in a clear and dust-free place.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 General Requirements for Installation This product is available at any place where traditional electric appliances are available. A place that meets the following criteria is recommended for the best performance: • Install the product at a flat and well-ventilated place.
Ethernet Port The rear panel of AP-VP150 is equipped with two RJ45 Ethernet ports. Use the standard cable and connector if you want to access the LAN network by using this port. Refer to the cable specification of Appendix for information on the pin specification of Ethernet cables.
Page 29
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Name Shape Quantity Main Frame of AP-VP150 Remote Control LAN Cable (RJ45 to RJ45) Console Cable (RJ45 to DB9) External Adapter and Power Cable (Power cord of 220V) If the product is broken while being moved or has any defects, contact Technical Sales division or Customer Support team of AddPac (Representative phone number: (02)568- 3848).
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Names and Features of Remote Control Button (Figure 2-1) Remote Control for AP-VP150 [Table 2-2] Name and Feature of Remote Control Button Name Feature Call Makes a call to the recent call log.
Page 31
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 HOLD Blocks the output of your and the other’s screen and voice. (This feature is different from the keypad.) VOD/DISP VOD: Enables the embedded VoD browser (To be enabled). /VIEW/PTZ DISP: Disabled VIEW: Changes the conversation view/remote view/local view during a call.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 AP-VP150 Installation Ethernet Interface Connection • Connect the WAN interface for Internet access to the LAN interface of the WAN device (e.g. router or ADSL/cable modem) by using the UTP cable of RJ45.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 • Connect the LAN 1 interface to the PC by using a direct-through cable in IP-Share mode, and to the hub in NAT/PAT or bridge mode. • Use a direct-through cable to connect to the PC directly.
The PSTN port is used if a PSTN cable is used or a call cannot be made due to a network failure. You can connect a PSTN cable to the AP-VP150 PSTN port in order to implement PSTN backup. As shown in the figure below, connect a PSTN cable:...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Connection of Audio Input Interface The audio input port allows you to supply sounds of a microphone system and a DVD player. You can use a cable of “3.5mm stereo jack” to connect to a microphone system or a DVD player.
The audio output port allows you to connect to your speaker or headset by using a cable of “3.5mm stereo jack.” Since the audio output port of AP-VP150 is a headset, you should change the property in OSD if a speaker system is used. Use a stereo cable of 3.5mm as...
DVD player. A video device that has a composite RCA video output port can be connected to AP-VP150. As shown in the figure below, use a composite RCA video table to connect to a video camera:...
The video output ports are categorized into a composite RCA video output interface and an S-VHS video output interface. AP-VP150 simultaneously transmits video through both of the two interfaces. You can use an appropriate cable to connect to an interface depending on video input ports such as TV.
Connection of USB Terminal The USB terminal of AP-VP150 conforms to the USB standard 1.1, and has a data rate of up to 12Mbps. You can connect to the USB memory drive to use it as [Table 3-1]. For your information, since the USB standard ensures compatibility, both USB 1.1 and 2.0 can be...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 AP-VP150 OSD Settings Initial Operation of AP-VP150 If you turn on the power of AP-VP150, you can see the initial screen from the TV or monitor as shown in Figure 3-9: (Figure 3-9) Initial Screen of AP-VP150 205 - 40 AddPac Technology Proprietary &...
Once the initial operation is complete, the default screen is configured as shown in Figure 3- 10. This screen shows that AP-VP150 and the EVI-D100 video camera are installed into a large TV. A video conference call is made by using the built-in TV and microphone system not the FXS port.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [Table 3-2] Default Screen of AP-VP150 Category Description Top Info Bar View Mode Local View: Default screen while you are not making a call. Plays back input video. Remote View: Plays back the video transmitted by the other party while calling.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Menus of AP-VP150 Press the menu buttons of the remote control to view the menus as shown in Figure 3-11. You can set up any and all features except for remote camera pan/tilt, layout change, and calling status check that are enabled during a call.
This menu has a recent call log and the speed dial menu. This menu is required to maintain AP-VP150, and allows you to set a time in a device, save the setting, and to save the power of LCD.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Using Input Mode If you want to enter the characters, numbers, and special characters in AP-VP150 by using the remote control, you should know how to use input mode. Since input mode is used to manage the phone book and to enter an account and an IP address in a network environment, you must be aware of the method.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [Table 3-4] Input Mode Category Description Character Set Enters characters in OSD by using the remote control. You can select a total of four character sets by pressing the F4 button of the remote control.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Phone Book Menus The features of Phone Book include searches using a name or a number, registration of a phone number, recent call logs, and speed dial. (Figure 3-14) Phone Book Screen 205 - 48 AddPac Technology Proprietary &...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [Table 3-5] Detail Menu Screens of Phone Book Category Description Searches a phone number from the registered phone book by using a name. This allows you to search a phone number by entering a name with the remote control or to make a call to the recipient by using the Call button.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Phone Book – Search By Name (Figure 3-15) Search By Name Screen Figure 3-15 shows the screen displayed when you select OSD >> Phone Book >> Name. The Name menu allows you to search a name from the names saved in Phone Book.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-16) Detail of Index 02 (Search by Name) Table 3-6 shows a description of Index 02 shown in Figure 3-16: [Table 3-6] Index 02 (Search by Name) Category Description Index Displays the index number of a phone number.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-17 to 3-21 show an example of searching a specific name from the Search by Name menu by using the keypad: (Figure 3-17) Selecting Menu >> Phone Book 205 - 52...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-18) Selecting Phone Book >> Name (Figure 3-19) Search By Name Screen 205 - 53 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-20) Entering “v” From Character Set 205 - 54 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-21) Making a Call to AP-VG1000 Using the Call Button 205 - 55 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Phone Book – Search By Number (Figure 3-22) Search By Number Screen Figure 3-22 shows the screen displayed when you select OSD >> Phone Book >> Number. The Number menu allows you to search a name from the phone numbers in Phone Book.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-23 to 3-31 show an example of searching and editing a specific name from the Search By Name menu by using the keypad: (Figure 3-23) Selecting Menu >> Phone Book (Figure 3-24) Selecting Phone Book >>...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-25) Search By Number Screen (Figure 3-26) Entering “3” Using the Remote Control 205 - 58 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-29) Moving to IP Address By Pressing the OK Button of Keypad (Figure 3-30) Changing the IP Address to “211.34.113.45” 205 - 60 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Phone Book – Register Figure 3-32 is a screen displayed when you select OSD >> Phone Book >> Register. The Register menu allows you to enter a new phone number in Phone Book. Enter the name, phone number, and IP address of the other party by using the remote control.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-33) Entering New Phone Number in Register Screen Table 3-7 shows a description of input items for a new phone number: [Table 3-7] Input Items for a New Phone Number in the Register Screen...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 IP Address Enters the IP address of the other party in Phone Book. Figures 3-34 to 3-45 show an example of entering a new phone number in the Register screen by using the keypad: (Figure 3-34) Selecting Menu >>...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-38) Moving to the Name Textbox When Using the OK Key of Keypad (Figure 3-39) Changing Input Mode to Alphabetical Uppercase Using the F4 Button of Keypad 205 - 66...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-40) Entering ANGELA in the Name Textbox (Figure 3-41) Moving to the Phone Number by Pressing the OK Button of Keypad 205 - 67 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-42) Entering 5000 as Phone Number (Figure 3-43) Moving to the IP Address by Pressing the OK Button of Keypad 205 - 68 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-44) Entering “213.23.112.32” as IP Address (Figure 3-45) Completing Input by Pressing the F2 Key After the “OK” Button of Keypad 205 - 69 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Phone Book – Recent Call Figure 3-46 shows a screen displayed when you select OSD >> Phone Book >> Recent Call. The Recent Call menu displays a recent call log and information on the other party. This menu allows you to make a call to an answered call, to check a call connected while you are absent, and to save incoming calls in the Phone Book menu.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-47) Recent Call Screen Figure 3-47 shows a description of the Recent Call screen: [Table 3-8] Recent Call Screen Category Description Displays the connection of a voice call. Incoming/Outg oing Displays that a voice call is connected and the call is not been answered.
Page 72
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Displays that a call is made to a video phone. Displays that a call is made or connected to a video phone. Index Displays the index numbers in Phone Book. Number Remote Displays the call information on the other party.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-52) Making a Call Using the Call Button of Keypad 205 - 75 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Phone Book – Speed Dial Figure 3-53 shows a screen displayed when you select OSD >> Phone Book >> Speed Dial. In the Speed Dial menu, phone numbers are sorted by index number and name only from the Phone Book menu.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-54) Speed Dial Screen The Speed Dial screen is described in Table 3-9: [Table 3-9] Speed Dial Screen Category Description Index Number Displays the index numbers in the Phone Book menu.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Page Down (F4) Moves down one page. Figures 3-55 to 3-58 show an example of making a call by using the speed dial: (Figure 3-55) Selecting Menu >> Phone Book (Figure 3-56) Selecting Phone Book >> Speed Dial 205 - 78 AddPac Technology Proprietary &...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-57) Selecting Index 04 (Figure 3-58) Making a Call Using the Call Button of Keypad 205 - 79 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Tool Box Menu This menu is configured with the Date & Time, Save All, Factory Default, Ring, and Power Save submenus. (Figure 3-59) Tool Box Screen [Table 3-10] Tool Box Menus...
Page 81
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Changes the ringing sound of AP-VP150 (To be enabled). Saves the power of AP-VP150 LCD/camera. 205 - 81 AddPac Technology Proprietary & Documentation...
Tool Box Date & Time This menu allows you to set the time and date in AP-VP150. You can use enter the time and date by using the remote control, and save them by using the SAVE(F2) button on the remote control.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [Table 3-11] Date & Time Category Description Year Enter the year in the current system. Month Enter the month in the current system. Enter the day in the current system. Week Hour Enter the hour in the current system.
Tool Box – Save All This menu allows you to save the values entered by using the remote control in OSD. Once the settings are saved, the settings remain the same even when AP-VP150 restarts. (Figure 3-61) Save All Screen 205 - 84 AddPac Technology Proprietary &...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-62) Selecting the “OK” Button of the Keypad to Save Data (Figure 3-63) Display Screen of the “Writing” Message 205 - 85 AddPac Technology Proprietary & Documentation...
Tool Box – Factory Default This menu allows you to delete and automatically reset the Configuration, Phone Book, and Recent Call menus of AP-VP150. It is not recommended that you should enable this menu except that this menu is requisite.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-66) Pressing the “OK” Button for Three Seconds After Selecting the Factory Default Menu (Figure 3-67) Restarting Automatically After All Settings and Records are Deleted 205 - 88 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Tool Box – Ring (To be Enabled) This menu allows you to select seven types of ringing sound from the internal speaker including mute when an outside call is made. You can hear six types of ringing sound except for mute by using the F1 key (Play) and select one.
This menu enables LCD and the internal camera to turn off automatically in accordance with the time setting for the purpose of power saving. AP-VP150 in power saving mode allows you to turn on LCD and the camera by using the touch screen or keypad. It is recommended that this menu should be enabled for longer lifetime of LCD and quality assurance.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 As shown in 3-69, you can select a time from 5, 10, 20, 30, or 45 minutes (Default: 10 minutes). (Figure 3-69) Power Save Screen 205 - 91 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 AV Setup Menu This menu is configured with the Volume, Display, Audio Codec, Video Codec, Bandwidth, and IO Ports submenus. The submenus allow you to enable acoustic and video features mainly. You can control all of the features by using the keypad easily, and select or enable most of the features in real-time while calling.
Controls the microphone/line-in properties of the input port and the speaker/line-out properties of the audio output port depending on the attributes of the I/O port of an acoustic device that will inter-work with AP-VP150. 205 - 93 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 AV Setup – Volume This menu allows you to adjust the volume of the audio I/O port and internal speaker and to amplify the microphone. (Figure 3-71) Volume Screen [Table 3-13] Volume Menu...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-72 to 3-78 show an example of adjusting the volume of the audio I/O port. You can control the volume by using the left/right direction keys of the keypad. (Figure 3-72) Selecting Menu >> AV Setup (Figure 3-73) Selecting AV Setup >>...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 AV Setup – Display This menu has the Camera In (Internal camera and composite RCA video input) and Display Out (Internal LCD, composite RCA video output, and S-VHS) submenus. The Camera In submenu has the Brightness, Contrast, Saturation, Horizontal Offset, Vertical Offset, and Mirror options.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-80) Adjusting Camera Input Screen [Table 3-15] Camera In Menu Category Description Brightness Adjusts brightness of the composite video input. The maximum value is 255, and the default is 128.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-81 to 3-88 show an example of adjusting the Camera In screen: (Figure 3-81) Selecting Menu >> AV Setup (Figure 3-82) Selecting AV Setup >> Screen 205 - 101 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-85) Adjusting Contrast (Figure 3-86) Adjusting Saturation by Using the F2 Button of the Keypad 205 - 103 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-87) Inverting Camera Input Left or Right 205 - 104 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-88) Adjusting Display [Table 3-16] Display Out Menu Category Description Brightness Adjusts the brightness of the composite video and S-VHS output. The default is 19. Blue Gain Adjusts the composite video and S-VHS output by using the blue bar.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-89 to 3-94 show an example of adjusting the Display screen: (Figure 3-89) Selecting Menu >> AV Setup (Figure 3-90) Selecting AV Setup >> Display 205 - 106 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-93) Adjusting Blue Gain (Figure 3-94) Adjusting Red Gain 205 - 108 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 AV Setup – Audio Codec This menu allows you to select the voice codec of AP-VP150. You can select G.711[PCM], G.729, or G.723.1 in OSD depending on your environment. Set the priority of the audio codecs depending on network environments and sound quality.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-96 to 3-98 show an example of selecting an audio codec: (Figure 3-96) Selecting Menu >> AV Setup (Figure 3-97) Selecting AV Setup >> Audio Codec 205 - 110 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 AV Setup – Video Codec This menu allows you to select a video codec used for AP-VP150. MPEG-4 and H.263 are used for AP-VP150, and the image quality of MPEG-4 is better than that of H.263. Examples of H.263 include QCIF and CIF, and those of MPEG-4 include QVGA, HalfVGA, and VGA.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-100) Video Codec Setting Screen [Table 3-17] Video Codec Settings Category Description Codec Selects between MPEG-4 and H.263. Image Size Sets the size of an image that will be transmitted to the other party. The higher the resolution is, the better the image quality is.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-101 to 3-105 show an example of selecting a video codec: (Figure 3-101) Selecting Menu >> AV Setup (Figure 3-102) Selecting AV Setup >> Video Codec 205 - 114 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [Table 3-18] Video Bandwidth Settings Category Description Bandwidth Changes the bandwidth setting in a higher-level range. Detail Sets a bandwidth in detail. Changes the bandwidth in the unit of 64 kbps.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-108 to 3-112 show an example of setting a video bandwidth: (Figure 3-108) Selecting Menu >> AV Setup (Figure 3-109) Selecting AV Setup >> Video Codec 205 - 119 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 AV Setup – I/O Ports This menu allows you to select the property of the audio I/O port. Since the audio input port can be connected to the line-out of the microphone or DVD player, you should select a microphone or line-in to fit for the attributes of this product.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-114 to 3-121 show an example of changing the property of the audio input port to line-in, and that of the audio output port to line-out: (Figure 3-114) Selecting Menu >> AV Setup (Figure 3-115) Selecting AV Setup >>...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-118) Selecting Line Input, Moving to the Upper Menu by Pressing the CANCEL Key (Figure 3-119) Selecting Audio Output Port 205 - 125 AddPac Technology Proprietary & Documentation...
This menu is configured with the submenus for WAN/LAN interface setting, SIP/H.323 signaling, services such as FTP, QoS for video, and other calling options. You should fully understand this menu to use AP-VP150. The menu is very important to build the optimal environment.
You can select DHCP, static IP address, or PPPoE depending on your network environment. This menu allows you to set the LAN interface of AP-VP150 and to use AP- VP150 as an IP sharing equipment or a bridge. Uses a phone in the SIP/H.323 protocol by using the SIP server or gatekeeper.
This menu enables the features of the WAN interface in AP-VP150. Since network environments are various, you should set this menu depending on your network environment. The WAN protocols supported by AP-VP150 are DHCP, static IP, and PPPoE. You can enter the address of IPv6.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 IPv6 Enters the address of IPv6. Selects Static, EUI-64, and Auto Configuration depending on your network environment. Figures 3-124 to 3-126 show a method of configuring DHCP in the cable modem environment: (Figure 3-124) Selecting Menu >>...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-127 to 3-135 show a method of setting a static IP that uses a static IP address: (Figure 3-127) Selecting Menu >> Network Setup (Figure 3-128) Selecting Network Setup >> Internet 205 - 132 AddPac Technology Proprietary &...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-135) Moving to the Upper Menu by Pressing the “OK” Button 205 - 136 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-136 to 3-142 show a method of setting PPPoE used ADSL: (Figure 3-136) Selecting Menu >> Network Setup (Figure 3-137) Selecting Network Setup >> Internet 205 - 137 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-140) Entering “ADDPAC” in Password (Figure 3-141) Entering “PAP” in Authentication by Using the Number Keys on the Keypad 205 - 139 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-142) Moving to the Upper Menu by Pressing the “OK” Button 205 - 140 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Network Setup – LAN Setup This menu allows you to determine how the LAN1 interface of AP-VP150 will be used. Select one of the checkboxes, which are None, DHCP for 1 PC, and DHCP for Several PCs, to connect the PC or Ethernet hub to LAN1.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Network Setup – VoIP Setup This menu allows you to perform settings required to inter-work with the SIP server or gatekeeper under SIP and H.323 or to adjust E.164 and QoS.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [Table 3-22] SIP Protocol Category Description Enters a user name required to sign up with the SIP server. User Name Enters a password required to sign up with the SIP server.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-147 to 3-150 show an example of entering the values required to inter-work with the SIP server: (Figure 3-147) Entering User Name (Figure 3-148) Entering Password 205 - 145 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-149) Entering IP Address of Primary Server (Figure 3-150) Entering Phone Number, Enabling On From Register e.164, and Entering OK 205 - 146 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 The figure below shows a screen displayed when you select the H.323 protocol: (Figure 3-151) H.323 Protocol Screen [Table 3-23] H.323 Protocol Category Description H.323 ID Enters the H.323 ID to be used for registering with the gatekeeper.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-152 to 3-157 show an example of entering the values required to inter-work with the gatekeeper: (Figure 3-152) Entering H.323 ID (Figure 3-153) Entering Password to Register With Gatekeeper 205 - 148...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-156) Entering Phone Number of E.164 (Figure 3-157) Entering “On” in Register GK and Pressing the “F2” Key to Complete Input 205 - 150 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 - Quality of Service (QoS) AP-VP150 allows you to transmit the compressed video of either MPEG-4 or H.263 as well as VoIP voice packets. High-definition video streams such as MPEG-4 are affected much by network status.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 - SIP Options This menu allows you to use supplementary features and options used for the SIP protocol and H.323 protocol. The features continue to be upgraded through future APOS upgrade.
Retry Counter The number of SIP UA retries refers to the number of times that SIP INVITE will be transmitted when you make a call using AP-VP150. If an attempt message to SIP INVITE is not received within a specific time because the network quality is poor or a failure occurs in the network, AP-VP150 will forward an INVITE message.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Network Setup – Service Port Setup This menu allows you to enable or disable the FTP, TELNET, or SNMP service in AP-VP150 and to change the TCP port number of a service.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Network Setup – Network Status This menu allows you to view network status including the protocol, Ethernet port IP, DNS, GK[H.323], and registration with the SIP proxy server. (Figure 3-162) Network Status Screen 205 - 156 AddPac Technology Proprietary &...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Application Menu This menu is configured with VoD Browser, IPTV, and Network Camera. The menu will be supported through software upgrade. (Figure 3-163) Application Setup Screen 205 - 157 AddPac Technology Proprietary & Documentation...
[Table 3-25] Network Setup Menu Category Description IPTV is an application used for the IPTV solution of AddPac Technology. You can watch high-definition TV in real-time through a large-scale server. VoD Browser is used for the VoD solution of AddPac Technology. This feature allows you to view a variety of contents at any time.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Remote Setup Menu This menu allows you to remotely adjust the screen size, frame rate, and bandwidth of AP- VP150 or AP-VG1000 that the other party is using while calling; thus, this feature is enabled only for the video devices of AddPac Technology.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [Table 3-26] Remote Setup Menu Category Description This menu allows you to set a bandwidth. The setting range is 128 Kbps to 4,160 Kbps. This menu allows you to set a resolution and a frame rate used for AP- VP150.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-166 to 3-154 show an example of setting the video bandwidth: (Figure 3-166) Selecting Menu >> Remote Setup (Figure 3-167) Selecting Remote Setup >> Bandwidth 205 - 162 AddPac Technology Proprietary & Documentation...
Page 163
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-168) Selecting Bandwidth Remote (Figure 3-169) Setting Bandwidth to 4,096 Kbps, Saving Using the F2 Key 205 - 163 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Remote Setup – VCodec Remote This menu allows you to set a resolution and a frame rate used for AP-VP150. Examples of MPEG-4 resolution include QVGA, HalfVGA, and VGA. Under H.263, QCIF(QVGA) and CIF(HVGA, VGA) are used.
Page 165
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Figures 3-156 to 3-159 show an example of selecting a video codec: (Figure 3-171) Selecting Menu >> Remote Setup (Figure 3-172) Selecting Remote Setup >> Video Codec 205 - 165 AddPac Technology Proprietary & Documentation...
Page 166
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 (Figure 3-173) Setting Image Size to QVGA (Figure 3-174) Setting Frame Rate to 30 fps 205 - 166 AddPac Technology Proprietary & Documentation...
Remote Setup – Permission This menu disallows you to adjust the size, frame rate, and bandwidth of the video transmitted from AP-VP150 or AP-VG1000 that the other party is using. The default is Remote Controls Permit. (Figure 3-175) Permission Screen 205 - 167 AddPac Technology Proprietary &...
How to Use AP-VP150 Using Video Phone With the Call/End Button The keypad of AP-VP150 or the Call button of the remote control is used as described in Table 4-1: [Table 4-1] Use of the Call Button on the Remote Control...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Keypad Remote Control (Figure 4-1) Recent Call Using the Call Button Keypad Remote Control (Figure 4-2) Making a Call Using the Call Button 205 - 169 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Keypad Remote Control (Figure 4-3) Canceling Using the End Button 205 - 170 AddPac Technology Proprietary & Documentation...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Speed Dial Using the Speed Dial Buttons The speed dial buttons on the keypad or remote control allow you to enable the Speed Dial menu in OSD. Keypad Remote Control (Figure 4-4) Making Speed Dial Using the Speed Dial Buttons...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Managing Phone Numbers Using Phone Book Buttons The remote control or the Phone Book button of the keypad allows you to enable the Phone Book menu in OSD. Keypad Remote Control...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Bar Toggle Using the Remote Info Button Press the Info button while calling to change the call time to the current time. If you press the button once again, the bars at the top and bottom of the screen will disappear. You can change the call time or current time or view the screen while calling more stably by removing the bars.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Keypad Remote Control (Figure 4-8) Changing Display to Current Time by Pressing the Info Button Keypad Remote Control (Figure 4-9) Removing Bards at the Top and Bottom of the Screen by Using the Info Button 205 - 174 AddPac Technology Proprietary &...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Changing View Mode Using the Layout Button If you do not perform any operations while calling, AP-VP150 will enter Conversation View mode. If you press the View button, the mode will be changed to Remote View mode. If you press the button again, the mode will be changed to Local View mode.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Keypad Remote Control (Figure 4-11) Switching to Remote View Using the Layout Button Keypad Remote Control (Figure 4-12) Switching to Local View Using the Layout Button 205 - 176 AddPac Technology Proprietary & Documentation...
Picture In Picture (PIP) allows you to display more than one video from a regular monitor or a TV. AP-VP150 supports PIP to enable a variety of view modes. PIP is enabled only in the remote view and local view while making a video call by using the “OK” button on the remote control or keypad.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Keypad Remote Control (Figure 4-14) Using PIP With the OK Button As shown in Figure 5-14, use the OK button to change the location of the small screen from No.1 to No. 4 in sequence. If you press the OK button when the screen is located at No. 4, the screen will disappear.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Camera Pan/Tilt Using the PTZ Button The Pan/Tilt feature allows you to adjust the video camera of the other party top/bottom/left/right easily and to enable zoom in/out or backlight only if the terminal of the other party is an AP-VG1000 video gateway.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 AP-VP150 Console Commands Basic Commands for Network Setup * Commands for Viewing Settings VP150# show running-config Building configuration... Current configuration: hostname VideoPhone username root password router administrator interface Loopback0 ip address 127.0.0.1 255.0.0.0...
Page 183
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 * IP and Default Route Settings VP150# configure terminal Enter configuration commands, one per line. End with CNTL/Z VP150(config)# interface fastethernet 0/0 → Fast Ethernet Interface Port 0 VP150(config-if)# ip address 172.20.103.1 255.255.0.0 → IP Address Setting VOIP_INTERFACE_DOWN VOIP_INTERFACE_UP : (172.20.103.1)
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 List of Video Mode Commands In AP-VP150, audio/video settings should be changed to OSD; however, depending on circumstances, you can change related settings by using Telnet. * Entering Video Mode VP150# VP150# configure terminal Enter configuration commands, one per line.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Selecting External Audio Input Port Mode This command allows you to select line input or microphone input as mode of the external audio input port (Default: Microphone). VP150(config-video0/0)# audio-in ? => Enter ? to display a list of commands.
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Selecting External Audio Output Port Mode This command allows you to change mode of the external audio output port on CLI (Default: headphone). VP150(config-video0/0)# VP150(config-video0/0)# audio-out ? line Line output head...
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 input port (Default: 64). VP150(config-video0/0)# VP150(config-video0/0)# video-in-contrast ? Contrast [0 - 127] VP150(config-video0/0)# video-in-contrast 64 VP150(config-video0/0)# Adjusting Video Input Saturation This command allows you to adjust the saturation of the internal camera and composite input port (Default: 68).
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Adjusting Vertical Video Input Offset Value This command allows you to adjust the vertical offset of the internal camera and composite input port. This command is used to connect the external video devices of the DVD player, if required (Default: 19).
Page 189
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Adjusting Color of External Video Output Port (Blue / Red) This command allows you to adjust the color of the internal LCD display and composite/S- VIDEO output port. The colors are blue and red (Default: 128).
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Appendix This Appendix describes the pin specification of the cables used for AP-VP150. • Console port signal and pin-out (RJ-45 to DB9) • Pin-out of the UTP cable (RJ-45 to RJ-45)
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 [Pin-Out of UTP Cable (RJ-45 to RJ-45)] The RJ-45 to RJ-45 Ethernet cable is used to connect AP-VP150 to another device (typically hub). The pin sequence of the RJ-45 connector is shown in Figure 7-1. For the signals and specification, refer to Table 7-2, “Signals and Pin-Out of Serial Ethernet Cable”.
Stands for VoIP Plug & Play Management Software. This integrated management software developed by AddPac Technology enables VoIP products to be installed in a AP-VPMS GUI environment, be monitored in real-time, or to be upgraded. This software also enables network administration.
Page 193
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Operation of verifying the identification of a person or a process. This is a security Authentication feature. This is a standard connector used to connect IEEE 802.3 10Base-2 coaxial cables to BNC Connector Media Access Unit (MAU).
Page 194
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 value is calculated by the recipient again for verification. This coaxial cable is made of an external cylinder-type conductor that wraps an internal wire conductor. Examples of the coaxial cables used for LAN include 50Ω...
Page 195
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 private use. Encryption means that a specific algorithm is applied to data in order to convert data Encryption to a form that unauthorized users cannot identify. Baseband LAN standard initiated by Xerox Corporation and co-developed by Xerox, Intel, and DEC.
Page 196
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 This specifies the PCM voice coding technique of 64Kbps. Voice is encoded under G.711 in an appropriate format that enables digital voice transmission over either G.711 PSTN or PBX. G.711 is specified under the ITU-T standard of G-series recommendation.
Page 197
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 H.245 This ITU standard is applied to H.245 endpoints control. This standard is an extension of the ITU-T standard H.320 that enables voice H.323 conferences over LAN or another packet switching network as well as video transmission over the Internet.
Page 198
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 individuals or enterprises. ISP has devices and communication lines required for Internet access, and large ISPs have their own high-speed dedicated lines in order to provide services that have better quality and are less dependent on telephone network service providers to their customers.
Page 199
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Stands for Metropolitan-Area Network. This network covers the entire area of a large city. The operation area of MAN is geographically larger than that of LAN; however, is smaller than that of WAN. Compare to: LAN, WAN.
Page 200
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Connection POTS Stands for Plain Old Telephone Service. Reference: PSTN. Stands for Point-to-Point Protocol. This protocol is the advanced version of SLIP that enables a router-to-router connection or a host-to-network connection through synchronous or asynchronous lines.
Page 201
This is software that allows you to monitor AP-GK1000, AP-GK2000, and AP- SmartViewer GK3000, which are the gatekeeper series of AddPac Technology, in a Graphical User Environment (GUI) environment in real-time and to search or manage statistical data. Stands for Simple Network Management Protocol. This is a network management protocol almost dedicated to TCP/IP networks.
Page 202
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 of the protocol suites developed in the seventies by DoD of the U.S. to help build a global inter-network. TCP and IP are two of the best known protocol suites. Reference: IP and TCAP Stands for Telephone Company.
Page 203
AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00 Internet. VoIP enables a router to deliver voice traffic (e.g. phone calling and facsimile) over an IP network. Over VoIP, DSP decomposes voice signals into frames, and a pair of the decomposed frames is grouped. Then, the grouped frames are saved in a voice packet.
Need help?
Do you have a question about the AP-VP150 and is the answer not in the manual?
Questions and answers