IPNext 190 System Installation Guide
IP TCP Keep-alive
TCP Session is formed with the corresponding service To use variety of services of the IPNext PBX (Coloring
Service, Voice Mail, Messenger, IVR). Use tcp keep-alive count and timeout settings to check TCP Session
constantly.
It is recommended to use the same settings between the IPNext PBX and server.
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# ip tcp keep-alive count 5
3
IP-PBX(config)# ip tcp keep-alive idle 30
Table 3-52 IP TCP Keep-alive
Command
AddPac Technology Proprietary & Documentation
Description
Enter APOS command entry mode
If there is no response for keep-alive
message, the count for re-try
(Default: count 8)
After receiving a response for keep-
alive message, this is the timeout
setting until keep-alive message is
received.
(Default: idle 300)
132 - 74
Need help?
Do you have a question about the IPNext190 and is the answer not in the manual?