Line Vty/Console; Table 3-16 Line Vty/Console Configuration Settings; Table 3-17 Verifying Line Vty/Console Settings - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide

Line vty/console

This command configures the settings for the remote user access and console. If no entry is made for a certain
time period, this command configures the settings for the time to delete the corresponding terminal. If the setting
is not entered, the default value is set to10 minutes. If you do not want to delete the terminal, set the time to 0.
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# line vty
3
IP-PBX(config-line)# exec-timeout < minutes> <
seconds>
4
IP-PBX(config-line)# exec-timeout 0
5
IP-PBX(config-line)# session-limit <1-8>
6
IP-PBX(config-line)# session-limit 5
7
IP-PBX(config)# exit
8
IP-PBX(config)# line console
9
IP-PBX(config-line)# exec-timeout 0
Step
1
IP-PBX# show run
Building configuration...
Current configuration:
version 8.47.024
hostname IP-PBX
!
line console

Table 3-16 Line vty/console Configuration Settings

Command

Table 3-17 Verifying Line vty/console Settings

Command
AddPac Technology Proprietary & Documentation
Description
Enter APOS command mode
Enter vty configuration mode
Set the time for ending the session of
the terminal automatically if no entry is
made for a certain time period.
If no entry is made, the session of the
terminal is not ended
(Default: exec-timeout 10)
Set the maximum number of vty
sessions
Set the limit on vty session to 5
Exit from vty configuration mode
Enter console configuration mode
If no entry is made, the console
terminal session is not ended
(Default: exec-timeout 10)
Description
Use show run command to verify Line
VTY/Console
132 - 52