System-Level Basic Configuration Settings; Login; Table 3-3 Logging In As Root - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide

System-Level Basic Configuration Settings

Login

You can create many user accounts to log in the IPNext190. Each account is limited for its access
and APOS configuration settings depending on its level. The limitations of the user account, the
'root', are listed as to follow:
The user account 'root' can not be deleted.
The entire account information can be verified by 'root' only.
Even if the user's level is set to Admin and not the 'root', the one can read one's account
information.
Therefore, the privilege deleting and adding the account is given only to the 'root'. Even though
this can be done by Admin, the difference is recognized as the 'root' and the Admin created by
the 'root'.
NOTE
At the factory default, the password of the IPNext PBX Series is set to 'router'.
Step Command
1
Welcome, APOS(tm) Kernel Version 8.47.010.
Copyright (c) 1999-2008 AddPac Technology Co., Ltd.
Login:
Login: root
Password: <password>
2
IP-PBX> enable
IP-PBX#

Table 3-3 Logging in as Root

AddPac Technology Proprietary & Documentation
Description
Log in root account
Get into APOS configuration command
mode by entering the factory default
password 'router' and enable at the IP-PBX
mode and then b
132 - 45