Hostname; Table 3-11 Disabling Password; Table 3-12 Creating A Hostname; Table 3-13 Initializing Hostname - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide
Current configuration:
version 8.47.024
!
hostname IP-PBX
enable password abc
Step Command
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# no enable password

hostname

You can change the prompt name in CLI that appears when you connect to the devices through a
console or Telnet. If you manage multiple devices through Telnet connection, the host name is very
important. It would be convenient to use the host name as the device name or location.
The following example shows to set the host name to 'IPNext190'.
Step
1
#
# config t
2 (config)# hostname IPNext190
3 IPNext190(config)# exit
IPNext190#
Step
1
IPNext190#
IPNext190# configure terminal
IPNext190(config)#
2
IPNext190(config)# no hostname

Table 3-11 Disabling Password

Table 3-12 Creating a Hostname

Command

Table 3-13 Initializing Hostname

Command
AddPac Technology Proprietary & Documentation
command
Description
Description
Enter APOS configuration command mode
Set the host name to 'IPNext190'
The hostname is set to IPNext190
Description
132 - 50