Password; Table 3-8 Creating A Password; Table 3-9 Enable Mode Entry; Table 3-10 Verifying The Created Password - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide

Password

After the console connection, you have the privilege to execute only the show command. To get more
privilege, you should enter the enable mode. If regular users enter the enable mode, the users will have
all the privileges for allowing the users to change the system settings. Thus, you should set a password
so that only the administrator is authorized enter the enable mode.
Step
1
#
# config t
2 (config)# enable password {password}
3 IP-PBX(config)#
<password>
4 IP-PBX(config)#
<password>
Step Command
1
Login:
Login: root
Password: <password>
IP-PBX>
2
IP-PBX> enable
Password: <password>
IP-PBX#
Step Command
1
IP-PBX# show run
Building configuration...
Current configuration:
version 8.47.024
!
hostname IP-PBX
enable password 8 7N7KS8iqAThtDO7SODGdVw==
2
IP-PBX# show run
Building configuration...

Table 3-8 Creating a Password

Command
enable password
enable password

Table 3-9 Enable Mode Entry

Table 3-10 Verifying the Created Password

AddPac Technology Proprietary & Documentation
Enter APOS configuration command mode
Create a password
8 Enable the password
Disable the password
Description
Log in root
Enter the password for Enable Mode
Entry
Description
Verify enable password which is the
created password by using shown run
command (Hidden)
Verify enable password which is the
created password by using shown run
Description
132 - 49