Table 3-54 Verifying Ip Tcp Keep-Alive - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide
4
IP-PBX(config)# ip tcp keep-alive initial 5
5
IP-PBX(config)# ip tcp keep-alive interval 10
Step
1
IP-PBX# show run
Building configuration...
Current configuration:
version 8.47.024
hostname IP-PBX
!
ip tcp keep-alive count 5
ip tcp keep-alive idle 30
ip tcp keep-alive initial 5
ip tcp keep-alive interval 10
!
2
IP-PBX# show ip tcp config
!
(생략)
!
Assume SO_KEEPALIVE on all TCP connections : 1
tcp_keepcnt : 5
30 tcp_keepintvl : 10
!
Table 3-53 Verifying IP TCP Keep-alive
Command
tcp_keepinit : 5 tcp_keepidle :
AddPac Technology Proprietary & Documentation
This is the timeout setting to wait for
ACK message after TCP SYN is
transmitted from the other party
(Default: initial 25)
If there is no response for keep-alive
message, this is the setting for retry
time interval.
(Default: interval 25)
Description
Use show run command to
verify the settings of ip tcp
keep-alive
Use show ip tcp
command to verify the settings
of ip tcp keep-alive
config
132 - 75