Table 3-65 Changing Ldap Port; Table 3-67 Verifying Ldap And Notification Server Configuration Settings - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# ldap
3
IP-PBX(config-ldap)# no slapd
Waiting for cache to release all entries.
IP-PBX(config-ldap)#
inactive.
4
IP-PBX(config-ldap)# slapd 9389
LDAP LDBM backend cache entry size is 5000
LDAP daemon is now active
5
IP-PBX(config-ldap)# exit
6
IP-PBX(config)# ldapclient
7
IP-PBX(config-ldapclient)# host 127.0.0.1 9389
8
IP-PBX(config-ldapclient)# end
9
IP-PBX# write
Proceed with write? [confirm]
Building configuration...
[OK]
flash:/flash/apos.cfg
10
IP-PBX# reboot

Table 3-67 Verifying LDAP and Notification Server Configuration Settings

Step
1
IP-PBX# show run
Building configuration...
Current configuration:
version 8.47.024
hostname IP-PBX
!
ldap
data-dir /hd/ldap
suffix "dc=addpac,dc=com"
Table 3-66 Changing LDAP Port
Command
LDAP daemon
Configuration
Command
AddPac Technology Proprietary & Documentation
Enter APOS command entry mode
Enter ldap configuration mode
Disabling ldap service
is now
Set ldap port to 9389
(Range: 1-65535)
Exit from ldap configuration mode
Enter ldapclient configuration mode
Change ldap server port to 9389
Exit from ldapclient configuration
mode
Save the settings
saved to
Reboot the system
Description
Description
Use show run command to
verify ldap and notification
server configuration settings
132 - 85