Step7. Configure Ldapclient; Step8. Verify The Status Of Call Manager Service; Table 4-7 Configuring Ldap Client; Table 4-8 Verifying The Status Call-Manager Service - AddPac IPNext190 Installation Manual

IPNext 190 System Installation Guide

Step7. Configure ldapclient

When initialization of Call Manager and rebooting are completed by System Maintenance Tool, you are ready
to configure Ldapclient for Call-Manager Service.
Step
1
IP-PBX#
IP-PBX# configure terminal
IP-PBX(config)#
2
IP-PBX(config)# ldapclient
3
IP-PBX(config-ldapclient)# name IPNext190_test
4
IP-PBX(config-ldapclient)# host 127.0.0.1 389
5
IP-PBX(config-ldapclient)# ldap enable

Step8. Verify the Status of Call Manager Service

After the settings of ladapclient is completed, use show call-manager domain cluster command to verify the
status of Call Manager service (If CallManger Status is In Service and Monitoring LDAP Connection Status is
Enable, the service is in normal operational status).
Step
1
IP-PBX# show call-manager domain cluster
Device pool
---------------------------
DevicePool 1
Name = default
Region = 1
CallManagerGroup Information
- N/A
CallManager Status Summary
4-9
Table Configuring Ldap Client
Command
Table 4-10 Verifying the Status Call-Manager Service
Command
AddPac Technology Proprietary & Documentation
Description
Enter the APOS command mode
Enter ldapclient configuration mode
Configure device name to be registered
to ldap
Specify the IP and port of ldap server
Default IP (127.0.0.1) Default Port
(389)
Enable ldap Client service
Description
If CallManager Service is In Service
and ldap connection is UP, the service
is in the normal operational status
132 - 113