IPNext 190 System Installation Guide
Chapter 4.
When you execute the data initialization of the IPNext190 for the first time or HDD or Flash Memory is
damaged by an unexpected failure during its operation, the data needs to be initialized (Call Manager,
Announcement File, Database Schema and other basic files).
The following details describe the data initialization process of the IPNext190.
* This procedure initializes the entire data and is used when Smart Directory Server is damaged during its
operation or a new version needs to be upgraded. Therefore, a precaution is required.
Basic System Configuration
Step1. Initialize
This command initializes all the configuration settings of the IPNext190. Use erase startup-config command to
initialize the settings and then reboot the system, so you may enter the initial mode
Step
1
IP-PBX#
IP-PBX# erase startup-config
IP-PBX# reboot
Proceed with reboot? [confirm]
Reboot System ..
Please wait few seconds
IP-PBX(config)#
Initializing
Table 4-1 Initializing
Command
AddPac Technology Proprietary & Documentation
Description
Use erase startup-config command to
initialize
.
132 - 107
Need help?
Do you have a question about the IPNext190 and is the answer not in the manual?