NXP Semiconductors MPC5644A Reference Manual page 1731

Table A-6. Changes between revisions 5 and 6 (continued)
Chapter
Enhanced Direct Memory Access
Controller
Multi-Layer AHB Crossbar Switch In
Freescale Semiconductor
In Table 8-22 (DMA request summary for eDMA)
change done is as follows:
• Changed "DMA Request" from "Reserved" to "No request"
• Changed "Source" and "Description" from "Reserved" to "—".
• Updated Section 8.5.8, Dynamic programming
Figure 9-4 (Slave General Purpose Control Register (XBAR_SGPCRn))
updated
• Bit "14" from "0" to "HPE1" and access to Read/Write.
• Bit "13" from "HPE2" to "0" and access to "Read only zero"
• Bit "11" from "0" to "HPE4" and access to Read/Write.
• Bit "9" from "0" to "HPE6" and access to Read/Write.
MPC5644A Microcontroller Reference Manual, Rev. 6
Changes
for "Channels" 32,33,58-63 the
Revision history
1731