NXP Semiconductors MPC5644A Reference Manual page 1708

Revision history
Table A-2. Changes between revisions 1 and 2 (continued)
Chapter
Chapter 29
FlexCAN Module
1708
Message Buffer Architecture section added
Typical CAN System figure and text added to Overview section
Block diagram replaced
Message buffer architecture block diagram added
Register name changes:
• CTRL renamed to CR
• IMASK2 renamed to IMRH
• IMASK1 renamed to IMRL
• IFLAG2 renamed to IFRH
• IFLAG1 renamed to IFRL
MCR register fields renamed:
• MCR[NOT_RDY] renamed to MCR[NOTRDY]
• MCR[SOFT_RST] renamed to MCR[SOFTRST]
• MCR[FRZ_ACK] renamed to MCR[FRZACK]
• MCR[WRN_EN] renamed to MCR[WRNEN]
• MCR[LPM_ACK] renamed to MCR[MDISACK]
• MCR[BCC] renamed to MCR[MBFEN]
CR register fields renamed:
• CR[BOFF_MSK] renamed to CR[BOFFMSK]
• CR[ERR_MSK] renamed to CR[ERRMSK]
• CR[CLK_SRC] renamed to CR[CLKSRC]
• CR[TWRN_MSK] renamed to CR[TWRNMSK]
• CR[RWRN_MSK] renamed to CR[RWRNMSK]
• CR[BOFF_REC] renamed to CR[BOFFREC]
ESR register fields renamed:
• ESR[TWRN_INT] renamed to ESR[TWRNINT]
• ESR[RWRN_INT] renamed to ESR[RWRNINT]
• ESR[BIT1_ERR] renamed to ESR[BIT1ERR]
• ESR[BIT0_ERR] renamed to ESR[BIT0ERR]
• ESR[ACK_ERR] renamed to ESR[ACKERR]
• ESR[CRC_ERR] renamed to ESR[CRCERR]
• ESR[FRM_ERR] renamed to ESR[FRMERR]
• ESR[STF_ERR] renamed to ESR[STFERR]
• ESR[TX_WRN] renamed to ESR[TXWRN]
• ESR[RX_WRN] renamed to ESR[RXWRN]
• ESR[FLT_CONF] renamed to ESR[FLTCONF]
• ESR[BOFF_INT] renamed to ESR[BOFFINT]
• ESR[ERR_INT] renamed to ESR[ERRINT]
• ESR[WAK_INT] renamed to ESR[WAKINT]
MPC5644A Microcontroller Reference Manual, Rev. 6
Changes
Freescale Semiconductor