4.3.4
Cutting media manually
CAUTION
Right after printing, the media guide becomes very hot.
Allow the media guide to cool down before the next operation.
Step 1:
Verify the following regarding the operational condition of the product.
Printing or other operations are not in progress.
The operation panel display is Normal.
Step 2:
To change the position to cut the roll media, refer to "4.4.1 Feeding media" and advance the
roll media to the desired cut position.
Step 3:
Open the front cover.
1
N°.
1
Front cover
Name
4-88
CS9360 User's Guide