Oce CS9360 User Manual page 111

CS9360 User's Guide
NOTE
Do not remove only ink pack while high capacity pack adapter is installed on the printer.

The information of the remaining smart chip card will be rewritten and the ink pack will not
be usable.
Step 8:
Take out the new ink pack from the bag.
NOTE
Open the bag just before attaching the ink pack to the high capacity pack adapter.

Leaving the ink pack with the bag open for a long time may result in abnormal printing.
Step 9:
Install the ink pack and smart chip card to high capacity pack adapter.
NOTE
To install or remove the high capacity pack adapter to/from the ink pack and smart chip

card, refer to the operation manual included with high capacity pack adapter.
Step 10:
Shake the high capacity pack adapter gently two to three times and insert it to the slot.
NOTE
Make sure that the ink pack and smart chip are installed on the high capacity pack adapter

before inserting it to the slot. If the high capacity pack adapter is inserted into the slot
without the ink pack, the remaining information will be rewritten and the ink pack will not
be usable.
Insert the high capacity pack adapter all the way to the end of the slot.

Step 11:
Confirm that the operation panel returns to Normal.
NOTE
If the high capacity pack adapter is replaced during a print job, the printer resumes

printing.
CAUTION
After installing the high capacity pack adapter, make sure to perform initial ink charge

from the Cleaning menu in the following case.
When using the high capacity pack adapter for the printer whose ink is charged for the

first time
When the high capacity pack adapter has been used, and after replacing it with a new one

and installing it to the printer
If you use the high capacity pack adapter without performing initial ink charge, the air

inside the high capacity pack adapter goes into the printer ink tube and may cause nozzle
clogging. 5.3 Cleaning menu
6-111