Oce CS9360 User Manual page 81

CS9360 User's Guide
Step 4: Set the media holder plates by sliding them from both sides of the platen.
NOTE
Do not use the media holder plates for media whose thickness is 400 μm (0.4mm) or

thicker.
The media holder plate may interfere with the print head.
3
2
4
1
N°.
1
2
3
4
Step 5:
After installing the media holder plates, make sure that they do not interfere with the media as
it is fed through the printer.
CAUTION
If a media jams when using the media holder plates, the plates may be deformed.

When the media holder plates are deformed,
Do not remove the clogged media by force.

Stop using the printer.

Using the printer with deformed media plates may damage the grid roller or print heads.

Contact your local Océ representative.
NOTE
If there is interference with the media as it is fed through the printer after the media holder

plates have been installed, the media holder plates should not be used.
Roll media
Media holder plate
Media loading position
Platen
Name
4-81
3
2
4
1
1