Oce CS9360 User Manual page 66

Each Adjust Patterns
Select and print one of the adjust patterns A to F and register the set value.
Follow the procedures below to adjust "Pattern A" only.
Step 1:
Display the Custom Adjust Print menu in the same way as in step 2 of "3.6.2.1 Custom
Confirmation Pattern".
Step 2: Press [+] or [-] to select "Adj.4: Fine PatternA".
Step 3:
Press [Enter].
"Warming Up", and then "Warming Up Skip -> E" are displayed.

NOTE
To start printing during warming up, press [Enter] while "Warming Up Skip -> E" is

displayed. 4.4.7 Start Printing during Warm up
An adjust print pattern for print quality adjustment is printed after warming up.

Regarding adjust print patterns, the same patterns are printed repeatedly on both edges

and the centre of the paper.
3-66
CS9360 User's Guide