Oce CS9360 User Manual page 52

Step 3: Press [Enter].
"Warming Up", and then "Warming Up Skip -> E" are displayed.

NOTE
To start printing during warming up, press [Enter] while "Warming Up Skip -> E" is

displayed. 4.4.7 Start Printing during Warm up
An adjust print pattern for print quality adjustment is printed after warming up.

Regarding adjust print patterns, the same patterns are printed on both edges and the

centre of the paper.
Step 4:
Check the both ends and the centre of the print result that printed with Adjust pattern, and
select the number from 1 to 7 that is not out of alignment.
"6" is selected in the next printing sample.

NOTE
"4" is the current setting value.

Step 5: "Pattern *: 4" (* indicates a pattern name as shown below) is displayed.
3-52
CS9360 User's Guide