Oce CS9360 User Manual page 64

NOTE
To start printing during warming up, press [Enter] while "Warming Up Skip -> E" is

displayed. 4.4.7 Start Printing during Warm up
An adjust print pattern for print quality adjustment is printed after warming up.

Six micro adjustment patterns will be printed. Input setting value for each pattern.
Regarding adjust print patterns, the same patterns are printed repeatedly on both edges

and the centre of the paper.
Step 4: Check the both ends and the centre of the print result that printed with Adjust pattern, and
select the number from 1 to 7 that is not out of alignment.
"3" is selected in the next printing sample of "Micro Adjustment Pattern A".

"5" is selected in the next printing sample of "Micro Adjustment Pattern B".

"6" is selected in the next printing sample of "Micro Adjustment Pattern F".

NOTE
"4" is the current setting value.

Step 5: "PatternA: 4" is displayed.
3-64
CS9360 User's Guide