Oce CS9360 User Manual page 61

CS9360 User's Guide
Step 4: Check the both ends and the centre of the print result that printed with Adjust pattern, and
select the number from 1 to 11 that is not out of alignment.
"3" is selected in the next printing sample of "Micro Adjustment Pattern A".

"5" is selected in the next printing sample of "Micro Adjustment Pattern B".

"4" is selected in the next printing sample of "Micro Adjustment Pattern F".

NOTE
"6" is the current setting value.

Step 5: "PatternA: 6" is displayed.
3-61