Oce CS9360 User Manual page 18

N°. Name
6 Platen
7 Pressurizing rollers
8 Media cut groove
9 Maintenance cover
10 Adjuster
11 Media holder plate
12 Connector
13 Waste fluid tank
Installed inside of the front cover. The heater (platen heater) to dry ink is installed
inside.
Installed inside of the front cover. Press and hold the media when printing.
Installed inside of the front cover. Used to cut media straight.
Used to prevent the user from touching the inner mechanical section.
Open and close in the following cases.
•When cleaning the cleaning wiper
•When cleaning around the print head.
•When replacing the cutter
It is normally closed.
Used to install the printer horizontally.
Installed inside of the front cover. By attaching media holder plates to both sides of
the media, it is possible to prevent warpage.
Used to install spectrophotometer.
Used for collecting waste ink discharged from the printer.
2-18
CS9360 User's Guide
Function