1. Manuals
  2. Brands
  3. Oce Manuals
  4. Printer
  5. CS9360
  6. Installation manual

Oce CS9360 Installation Manual

Hide thumbs Also See for CS9360:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Océ
Please read this manual
before using
Thank you for purchasing a Océ product.
This manual explains the steps for unpacking,
mounting and basic installation before using the Océ
Full-color inkjet printer CS 9360.
This manual is intended for owners, installers, and
users of this product.
Understand the contents and instructions in this
manual before installing this product.

Installation flow chart

The broad steps for installation are shown below.
There are instructions for each section beginning on
the next page.
1 Unpacking boxes
1.1 Unpacking the printer box
　
1.2
Unpacking the stand box
2
Confirming bundled items
2.1
Items in the printer box
2.2
Items in the accessory box
2.3 Items in the stand box
CS9360 INSTALLATION MANUAL
3
Assembling
　
3.1
Procedure for assembling the stand
3.2
Attaching the stand
3.3 Detaching fastening materials
4
Installation
4.1
Installation environment
4.2
Installation procedure
5 Connecting the power cable
1
6 Turning the power ON/OFF
7
Setting the display language and units
8 Installing the ink cartridge
9 Loading the roll media
10 Checking the printing condition
AP-40810_1.0

Advertisement

Table of Contents
loading

Related Manuals for Oce CS9360

Summary of Contents for Oce CS9360

  • Page 1: Installation Flow Chart

    Océ CS9360 INSTALLATION MANUAL Please read this manual Assembling before using 6 Turning the power ON/OFF 　 Procedure for assembling the stand Thank you for purchasing a Océ product. Attaching the stand This manual explains the steps for unpacking, mounting and basic installation before using the Océ...

  • Page 2: Items In The Stand Box

    CS9360 INSTALLATION MANUAL 1 Unpacking boxes 2 Confirming bundled items Items in the stand box Procedures for unpacking boxes are explained. After unpacking, please confirm that the product has not damaged and no components are missing. This product is packaged separately, divided into the printer and the stand.

  • Page 3: Attaching The Stand

    CS9360 INSTALLATION MANUAL 3 Assembling Fasten the connector bar to the left stand in the 3. Remove the two transfer stays and fasten the printer same way as in Step 3. to the stand using eight butterfly screws. This section explains how to assemble the printer.

  • Page 4: Installation Environment

    CS9360 INSTALLATION MANUAL 3. Peel off the tape, be careful not to come in contact 4.1.1 Installation environmental condition 2. Carry the printer to the installation place. with T fence, and remove the Bearer collapse pre- 3. Turn the following adjusters in the direction as Select an installation location in accordance with the vention material and Bearer fix.

  • Page 5: Turning The Power On/Off

    　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 CS9360 INSTALLATION MANUAL 2. Connect the power cables (x 2) to the AC inlets (x 2) 2. Press the [Power] key on the Operation panel and 6.2 Turning the power OFF turn the power ON. on the rear of the product.

  • Page 6: Installing The Ink Cartridge

    CS9360 INSTALLATION MANUAL 8. Shake the ink cartridge gently two to three times. 5. Remove all the cleaning cartridges. 8 Installing the ink cartridge ・Make sure that the ink cartridges are inserted into This section explains how to install ink cartridges.
  • Page 7 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 CS9360 INSTALLATION MANUAL 6. Remove all the cleaning cartridges. 9. Shake the ink cartridge gently two to three times 8.2 Installing 440ml ink cartridges and insert it into the printer. ・Make sure that the ink cartridges are inserted into 1.
  • Page 8 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 CS9360 INSTALLATION MANUAL 8.3 Installing high capacity pack 6. Remove all the high capacity pack adapters. 11.Shake the high capacity pack adapter gently two to three times and insert it to the slot. adapters (option) ･Insert the high capacity pack adapter all the way to Use the optional high capacity pack adapters to the end of the slot.

  • Page 9: Loading The Roll Media

    　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 CS9360 INSTALLATION MANUAL 9 Loading the roll media 11. While holding the front end of the roll media, wind 5. Loosen the fixing levers of the right and left roll the media back for a short distance by turning the media holders, slide the roll media to the center This section describes how to load roll media.
  • Page 10 CS9360 INSTALLATION MANUAL 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 15. Press the [+] key or [-] key to select the user type 12. If the distance between the edge of the roll media and setting. the pressurizing roller is less than 5 mm, follow the procedure below to adjust the position of the roll media.
  • Page 11 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 CS9360 INSTALLATION MANUAL MEMO 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　11　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 AP-40810_1.0...
  • Page 12 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 CS9360 INSTALLATION MANUAL Océ - Technologies B.V. St. Urbanusweg 43 Venlo, The Netherlands, P.O. Box 101, NL 5900 MA Venlo...

Table of Contents