Oce CS9360 User Manual page 33

CS9360 User's Guide
Step 5: Pull the roll media out about 1 m from the front media feed slot which is located inside of the
front cover.
N°.
1
2
Step 6:
Rewind the roll media a little by rolling the flange on the roll media holder while holding the
edge of the media, and eliminate any slack or slant.
NOTE
If you set the roll media free while rewinding, the roll media will fall out from the media

feed slot on the rear of the product.
Confirm that the right edge of the roll media does not go beyond the loading mark.

If it does, it may affect print quality.
N°.
1
2
Roll media
Media feed slot
Roll media
Media loading mark
Name
Name
3-33
2
1
2
1
1