CS9360 User's Guide
•
After loading the media, the printer enters the user type setting menu.
TIP
Refer to the following for setting media.
3.4.2 Setting Roll Media
Step 2:
Press [+] or [-] to select the user type setting.
Step 3:
Press [Enter].
The user type setting is set.
"Media initial" is displayed and media initialization starts.
NOTE
If the following operations are performed in the user type setting menu, the printer starts
media initial operation without specifying a user-defined setting.
Pressing [Cancel].
No keys on the operation panel are pressed for ten seconds.
After media initial operation is complete, "Ready to Print" is displayed and the display shifts
to Normal.
3-37